Search
Filters
Close

WEO009616BWPP3N0Y000

PMOLED 0.69'' Graphic 96x16, White color, COG, 3V, Interface I2C, Glare, Consumer grade (FPC per Soldering)

DESCRIPTION

Consumer-grade COG OLED display, diagonal size 0.69 inch, made of resolution 96x16 pixels. This 0.69 inch OLED Display module is built-in with SSD1306 IC; it supports the I2C interface, the supply voltage for logic 3V (VDD), the supply voltage for display 7.5V (VCC), the display with 50% Checkboard current is 5mA @7.5V VCC (typical value), driving duty 1/16. 

This model is a small-size 0.69 inch COG OLED display that is ultra-thin, lightweight, and has low power consumption. It is very suitable for smart home applications, medical devices, portable devices, wearable devices, etc.  It can be operated at temperatures from -30℃ to +70℃; its storage temperatures range from -30℃ to +70℃.

DRAWING

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 C2N C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor.
C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor.
2 C2P
3 C1P
4 C1N
5 VBAT This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6 NC No connection
7 VSS This is a ground pin.
8 VDD Power supply pin for core logic operation.
9 RES# This pin is reset signal input. When the pin is low, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
10 SCL When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
11 SDA
12 IREF This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA.
When internal IREF is used, this pin should be kept NC.
13 VCOMH The pin for COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
14 VCC This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 96 × 16 Dots
Module dimension 26.3 × 8.0 × 1.26 mm
Active Area 17.26 × 3.18 mm
Pixel Size 0.16 × 0.18 mm
Pixel Pitch 0.18 × 0.20 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/16 Duty
IC SSD1306
Interface I2C
Size 0.69 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 0 4 V
Supply Voltage for Display VCC 0 16 V

Charge Pump Regulator Supply Voltage

VBAT 0 5 V
Operating Temperature TOP -30 70 °C
Storage Temperature TSTG -30 70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD 1.65 3.0 3.3 V
Supply Voltage for Display
(Supplied Externally)
VCC 6.0 7.5 8.0 V
Charge Pump Regulator Supply Voltage VBAT 3.0 4.2 V
Charge Pump Output Voltage for Display (Generated by Internal DC/DC) Charge Pump
VCC
7.0 7.5 V
Input High Volt. VIH 0.8×VDD VDD V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDD V
Output Low Volt. VOL 0 0.1×VDD V
50% check Board operating Current
(VCC Supplied Externally)
ICC 5 10 mA
50% check Board operating Current (VCC Generated by Internal DC/DC) IBAT   5 10 mA



SKU: WEO009616BWPP3N0Y000
Brand: Winstar
Available: No
Price Breaks
Quantity
1+
5+
10+
25+
Price
€3.40
€2.50
€2.40
€2.30

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€3.40 excl tax

DESCRIPTION

Consumer-grade COG OLED display, diagonal size 0.69 inch, made of resolution 96x16 pixels. This 0.69 inch OLED Display module is built-in with SSD1306 IC; it supports the I2C interface, the supply voltage for logic 3V (VDD), the supply voltage for display 7.5V (VCC), the display with 50% Checkboard current is 5mA @7.5V VCC (typical value), driving duty 1/16. 

This model is a small-size 0.69 inch COG OLED display that is ultra-thin, lightweight, and has low power consumption. It is very suitable for smart home applications, medical devices, portable devices, wearable devices, etc.  It can be operated at temperatures from -30℃ to +70℃; its storage temperatures range from -30℃ to +70℃.

DRAWING

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 C2N C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor.
C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor.
2 C2P
3 C1P
4 C1N
5 VBAT This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6 NC No connection
7 VSS This is a ground pin.
8 VDD Power supply pin for core logic operation.
9 RES# This pin is reset signal input. When the pin is low, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
10 SCL When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
11 SDA
12 IREF This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA.
When internal IREF is used, this pin should be kept NC.
13 VCOMH The pin for COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
14 VCC This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 96 × 16 Dots
Module dimension 26.3 × 8.0 × 1.26 mm
Active Area 17.26 × 3.18 mm
Pixel Size 0.16 × 0.18 mm
Pixel Pitch 0.18 × 0.20 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/16 Duty
IC SSD1306
Interface I2C
Size 0.69 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 0 4 V
Supply Voltage for Display VCC 0 16 V

Charge Pump Regulator Supply Voltage

VBAT 0 5 V
Operating Temperature TOP -30 70 °C
Storage Temperature TSTG -30 70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD 1.65 3.0 3.3 V
Supply Voltage for Display
(Supplied Externally)
VCC 6.0 7.5 8.0 V
Charge Pump Regulator Supply Voltage VBAT 3.0 4.2 V
Charge Pump Output Voltage for Display (Generated by Internal DC/DC) Charge Pump
VCC
7.0 7.5 V
Input High Volt. VIH 0.8×VDD VDD V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDD V
Output Low Volt. VOL 0 0.1×VDD V
50% check Board operating Current
(VCC Supplied Externally)
ICC 5 10 mA
50% check Board operating Current (VCC Generated by Internal DC/DC) IBAT   5 10 mA



Products specifications
Brand Winstar
Size 0.69"
Resolution 96x16
Active Area (mm) 17.26x3.18
Dot Size 0.16x0.18
Polarizer Glare
Color White
Power supply 3V
Display Interface I2C
Display IC SSD1306
Frame No
Touch Panel No touch
O. Temperature (°C) -30~70
Display Connection FPC per Soldering
Pin Nr. 14
Pin Pitch 0.62mm
Preferred - Not Preferred Not Preferred
Download
Products specifications
Brand Winstar
Size 0.69"
Resolution 96x16
Active Area (mm) 17.26x3.18
Dot Size 0.16x0.18
Polarizer Glare
Color White
Power supply 3V
Display Interface I2C
Display IC SSD1306
Frame No
Touch Panel No touch
O. Temperature (°C) -30~70
Display Connection FPC per Soldering
Pin Nr. 14
Pin Pitch 0.62mm
Preferred - Not Preferred Not Preferred
;