Menu
Cerca
Filters
Close
Menu

EVAL_KIT_WO256128-88IA#FC

Development Board for Graphic LCD 2.9'' 256x128, B/L white, DFSTN black neg, Transmissive, COG, 3.3V, Interface 6800/8080/SPI/I2C

DESCRIPTION

Evaluation kut for LCD VOG P/N WO256128-88IA#FC. WO256128-88IA#FC is a monochrome graphic LCD module made of 256x128 pixels, diagonal size 2.9 inch. This LCD Module is built in with ST75256 controller IC, it supports 6800 8-bit, 8080 8-bit parallel and 4-wire serial SPI and I2C interface. It has the same outline dimension, and VA size and same power supply 3.3V as WO12864-XXXD3#FC, but it has a much higher resolution and performance: the customers don’t have to change the mechanical design for their applications.

Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃. It is available for different LCD mode options, STN Negative, FSTN Negative (Double film) and FSTN positive and with LED backlight options, like white LED. Please contact with us if you need different LCD type and LED combination.

 

DRAWING

Graphic COG LCD 256x128, 256x128 LCD - WO256128A



SPECIFICATIONS

 

Interface Pin Function

Pin No.SymbolDescription
1 ITOGND ESD PIN
2 VG Power of SEG-drivers
3 V0 Positive operating voltage of COM-drivers
4 XV0 Negative operating voltage of COM-drivers
5  CA1P DC/DC Voltage converte pin
6 CA1N DC/DC Voltage converte pin
7 VDDA +3.3V
8 VDD +3.3V
9 VSS ground
10 COMSCN Set scan directing of COM
11 IF1 These pins select interface operation mode
IF1IF0MPU interface type
L L 4-line serial interface
L H IIC serial interface
H L 8-bit 6800 parallel interface
H H 8-bit 8080 parallel interface
Note: Refer to "Parallel / Serial Interface" for detailed information. 　
12 IF0
13 CSB Chip select input pin
14 A0 Whether the access is related to data or command
15 ERD Read or write enable terminal
16 RWR Read/Write execution control pin
17 RSTB Reset input pin
18~25 D0~D7 Data bus line
26 ITOGND ESD PIN

 

Mechanical Data

ItemDimensionUnit
Number of dots 256 × 128 －
Module dimension 80.0 × 54.0 × 9.5 mm
View area 70.7 × 38.8 mm
Active area 66.54 × 33.26 mm
Dot size 0.24 × 0.24 mm
Dot pitch 0.26 × 0.26 mm
Drive Method 1/128 DUTY,1/12 BIAS
Backlight Type LED
IC ST75256i
Interface 4-Line SPI/IIC/8-bit 6800/8-bit 8080

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － 70 ℃
Storage Temperature TST -30 － 80 ℃
MPU Interface Input Voltage VIN -0.3 － VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 － 4.0 V
LCD Power supply voltage V0- XV0 -0.3 － 19.0 V

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 3 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=70℃		 －
14.2
－		 －
14.5
－		 －
14.8
－		 V
V
V
Input High Volt. VIH － 0.7 VDD － VDD V
Input Low Volt. VIL － VSS － 0.3 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － VSS － 0.2 VDD V
Supply Current IDD VDD=3.3V － 1.5 － mA


SKU: EVAL_KIT_WO256128-88IA#FC
Brand: Winstar
Si tratta dela prima recensione per questo prodotto
Kit Accessori

DESCRIPTION

Evaluation kut for LCD VOG P/N WO256128-88IA#FC. WO256128-88IA#FC is a monochrome graphic LCD module made of 256x128 pixels, diagonal size 2.9 inch. This LCD Module is built in with ST75256 controller IC, it supports 6800 8-bit, 8080 8-bit parallel and 4-wire serial SPI and I2C interface. It has the same outline dimension, and VA size and same power supply 3.3V as WO12864-XXXD3#FC, but it has a much higher resolution and performance: the customers don’t have to change the mechanical design for their applications.

Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃. It is available for different LCD mode options, STN Negative, FSTN Negative (Double film) and FSTN positive and with LED backlight options, like white LED. Please contact with us if you need different LCD type and LED combination.

 

DRAWING

Graphic COG LCD 256x128, 256x128 LCD - WO256128A



SPECIFICATIONS

 

Interface Pin Function

Pin No.SymbolDescription
1 ITOGND ESD PIN
2 VG Power of SEG-drivers
3 V0 Positive operating voltage of COM-drivers
4 XV0 Negative operating voltage of COM-drivers
5  CA1P DC/DC Voltage converte pin
6 CA1N DC/DC Voltage converte pin
7 VDDA +3.3V
8 VDD +3.3V
9 VSS ground
10 COMSCN Set scan directing of COM
11 IF1 These pins select interface operation mode
IF1IF0MPU interface type
L L 4-line serial interface
L H IIC serial interface
H L 8-bit 6800 parallel interface
H H 8-bit 8080 parallel interface
Note: Refer to "Parallel / Serial Interface" for detailed information. 　
12 IF0
13 CSB Chip select input pin
14 A0 Whether the access is related to data or command
15 ERD Read or write enable terminal
16 RWR Read/Write execution control pin
17 RSTB Reset input pin
18~25 D0~D7 Data bus line
26 ITOGND ESD PIN

 

Mechanical Data

ItemDimensionUnit
Number of dots 256 × 128 －
Module dimension 80.0 × 54.0 × 9.5 mm
View area 70.7 × 38.8 mm
Active area 66.54 × 33.26 mm
Dot size 0.24 × 0.24 mm
Dot pitch 0.26 × 0.26 mm
Drive Method 1/128 DUTY,1/12 BIAS
Backlight Type LED
IC ST75256i
Interface 4-Line SPI/IIC/8-bit 6800/8-bit 8080

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － 70 ℃
Storage Temperature TST -30 － 80 ℃
MPU Interface Input Voltage VIN -0.3 － VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 － 4.0 V
LCD Power supply voltage V0- XV0 -0.3 － 19.0 V

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 3 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=70℃		 －
14.2
－		 －
14.5
－		 －
14.8
－		 V
V
V
Input High Volt. VIH － 0.7 VDD － VDD V
Input Low Volt. VIL － VSS － 0.3 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － VSS － 0.2 VDD V
Supply Current IDD VDD=3.3V － 1.5 － mA


Specifiche di prodotto
Brand Winstar
Size 2.9"
Risoluzione 256x128
In the Box Module LCD + development boards
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 2.9"
Risoluzione 256x128
In the Box Module LCD + development boards
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di WO256128-88IA#FC

WO256128-88IA#FC

Graphic LCD 2.9'' 256x128, B/L white, DFSTN black neg, Transmissive, COG, 3.3V, Interface 6800/8080/SPI/I2C
Da €13,50 IVA esclusa
Immagine di NS030-R001ER

NS030-R001ER

Resistive Touch panel 3.0'', O.D. 75.80x47.80mm, 4w, FPC per ZIF Connector
Da €3,90 IVA esclusa
Immagine di POWER_ADAPT3V_JACK1A

POWER_ADAPT3V_JACK1A

Power Adapter Input 100/240VAC Output Jack 3V 1A
Chiedi quotazione
Immagine di ADAPTOR_VIM_01352

ADAPTOR_VIM_01352

Adapter S10 USA/EU Black
€6,20 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2022 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;