Menu
Cerca
Filters
Close
Menu

WF101-1280800GH#0P3B-FC

Immagine di WF101-1280800GH#0P3B-FC Immagine di WF101-1280800GH#0P3B-FC
TFT 10.1'' 1280x800, HDMI Interface, 330cd/m², Wide View Angle (IPS), Capacitive touch panel Mouse mode with USB interface (GG), (no connectors)

DESCRIPTION

 

10.1 inch TFT display with incredibly high resolution. This model is having IPS TFT panel with a HDMI interface output, it's made of high resolution WXGA 1280x800. This model comes with a control board which supports HDMI signal interface output. It has a USB interface Projected Capacitive Touch Screen overlay on TFT panel. Winstar designed a connector part no. WWHDMI-00# for option, the customers can use it to connect the module with your Raspberry Pi directly. Also, we provide USB HID Mouse Bootloader for one finger and two fingers programming tool. Please contact us for detail.

You can simply use this TFT display as a computer display with any device which support HDMI signal output. This 10.1" TFT model comes in 1280x800 resolutions that would be good for embedded computing usage. Please note, this part no. does not include an HDMI connector or USB cable.

 

DRAWING

SPECIFICATIONS


Interface


HDMI

Pin No.SymbolI/OFunction
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 SCL I/O DDC(Data Display Channel) Clock
16 SDA I/O DDC(Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detect I/O Hot plug detect
I: input, O: output, P: Power

PCAP USB Pin Definition

PinSymbolFunction
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground

Power-Jack

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC - No connection

 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1280 × 3(RGB) × 800 dots
Module dimension 257.96 × 168.6 × 22.4 mm
Active area 216.96 (H) × 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black
Pixel Arrangement R.G.B. Vertical Stripe
Backlight Type LED, Normally White
Aspect Ratio 16:9
Electrical Interface (Logic) Support HDMI Connector (Only DVI Signal)
PCAP IC GT928 or Equivalent
PCAP FW Version 0X50
PCAP Interface USB
Touch Panel With PCAP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -20 － +70 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 4.9 5 5.1 V
Supply Current For LCM IDD － － 1.9 2.7 A
LED life time － － 50000 － － Hr
SKU: WF101-1280800GH#0P3B-FC
Brand: Winstar
Disponibile: No
Si tratta dela prima recensione per questo prodotto
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€134,10
€131,90
€118,70

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€134,10 IVA esclusa

DESCRIPTION

 

10.1 inch TFT display with incredibly high resolution. This model is having IPS TFT panel with a HDMI interface output, it's made of high resolution WXGA 1280x800. This model comes with a control board which supports HDMI signal interface output. It has a USB interface Projected Capacitive Touch Screen overlay on TFT panel. Winstar designed a connector part no. WWHDMI-00# for option, the customers can use it to connect the module with your Raspberry Pi directly. Also, we provide USB HID Mouse Bootloader for one finger and two fingers programming tool. Please contact us for detail.

You can simply use this TFT display as a computer display with any device which support HDMI signal output. This 10.1" TFT model comes in 1280x800 resolutions that would be good for embedded computing usage. Please note, this part no. does not include an HDMI connector or USB cable.

 

DRAWING

SPECIFICATIONS


Interface


HDMI

Pin No.SymbolI/OFunction
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 SCL I/O DDC(Data Display Channel) Clock
16 SDA I/O DDC(Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detect I/O Hot plug detect
I: input, O: output, P: Power

PCAP USB Pin Definition

PinSymbolFunction
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground

Power-Jack

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC - No connection

 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1280 × 3(RGB) × 800 dots
Module dimension 257.96 × 168.6 × 22.4 mm
Active area 216.96 (H) × 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black
Pixel Arrangement R.G.B. Vertical Stripe
Backlight Type LED, Normally White
Aspect Ratio 16:9
Electrical Interface (Logic) Support HDMI Connector (Only DVI Signal)
PCAP IC GT928 or Equivalent
PCAP FW Version 0X50
PCAP Interface USB
Touch Panel With PCAP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -20 － +70 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 4.9 5 5.1 V
Supply Current For LCM IDD － － 1.9 2.7 A
LED life time － － 50000 － － Hr
Specifiche di prodotto
Brand Winstar
Size 10.1"
Risoluzione 1280x800
Area Attiva (mm) 216.96x135.60
Colore Full Color
Interfaccia Display HDMI
IC Controller Display TFP401
Angolo Visione IPS
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display HDMI Connector
Nr. Pin -
Passo Pin -
IC Controller Touch Panel GT928
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 10.1"
Risoluzione 1280x800
Area Attiva (mm) 216.96x135.60
Colore Full Color
Interfaccia Display HDMI
IC Controller Display TFP401
Angolo Visione IPS
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display HDMI Connector
Nr. Pin -
Passo Pin -
IC Controller Touch Panel GT928
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di CABLE_HDMI

CABLE_HDMI

HDMI Cable V1.4 High speed, with Ethernet, Male-male connectors, 1.5 meters
€18,00 IVA esclusa
Immagine di POWER_ADAPT5V_JACK2A

POWER_ADAPT5V_JACK2A

Power Adapter Input 100/240VAC Output Jack 5V 2A (OTP***195)
€7,30 IVA esclusa
Immagine di WWHDMI-00#

WWHDMI-00#

HDMI Connector for TFT module and Raspberry Pi 3B+ Version or below Version
Da €2,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2021 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;