Cerca
Filters
Close

WF283-240320AD#000-FC

TFT 2.8'' 240x320, Portrait, Transflective, Interface RGB/CPU/SPI IC HX8367-A, 500cd/m², No touch

DESCRIPTION

2.83 inch portrait mode Transflective TFT-LCD display module, made of resolution 240x320 pixels. This module built in with HX8367-A driver IC, it supports MCU/SPI/RGB interface; View Direction 3 o'clock, Gray Scale Inversion Direction 9 o'clock, Aspect Ratio 3:4, brightness 500 nits (typical value), Glare surface panel. Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃.

Transflective TFT-LCD display; it is characterized by very good readability in bright environments and direct sunlight. Transflective TFT display featured a transparent reflector in front of the backlight. The incoming light is reflected and used to illuminate the TFT display. Therefore, the readability of the content in very bright light is perfect even without any backlight. Customers using a transflective TFT module can save power by reducing or turning off the display's backlight during bright environments.

Ttransflective TFT v.s. Transmissive TFT

 

DRAWING

2.83 inch Transflective TFT LCD Display 240x320 - WF0283ATDAJDNN0

 

SPECIFICATIONS

Interface

LCM PIN Definition

NOSymbolFunctionI/O
1 IM0 System interface select.
I
2 IM1
3 IM2
4 IM3
5 RESET Reset pin. Setting either pin low initializes the LSI.
Must be reset after power is supplied.
I
6 VSYNC Vertical synchronizing signal in RGB interface. I
7 HSYNC Horizontal synchronizing signal in RGB interface I
8 DOTCLK Data enable signal in RGB interface I
9 ENABLE A data ENABLE signal in RGB I/F mode I
10-27 DB17-DB0 18-bit bi-directional data bus. I/O
28 SDO Serial data output pin in serial bus system interface O
29 SDI Serial data input pin in serial bus system interface.
The data is inputted on the rising edge of the SCL signal.
I
30 RD Read enable pin I80 parallel bus system interface. I
31 WR/SCL (WR)Write enable pin I80 parallel bus system
interface.(SCL)server as serial data clock in serial bus system interface.
I
32 RS Command / parameter or display data selection pin. I
33 CS Chip select signal.Low: chip can be accessed;High:
chip cannot be accessed
I
34 FMARK Tearing effect output. O
35 IOVCC Digital IO Pad power supply. P
36 VCC Analog power supply P
37 VCI Analog power supply. P
38 GND Power ground. P
39 NC No connection -
40 NC No connection -
41 NC No connection -
42 NC No connection -
43 LEDA LED light, anode.  
44 LEDK1 LED light, cathode  
45 LEDK2 LED light, cathode  
46 LEDK3 LED light, cathode  
47 NC No connection  

 

General Specifications

ItemDimensionUnit
Size 2.83 inch
Dot Matrix 240 x RGB x 320(TFT) dots
Module dimension 53.1(W) x 71.1(H) x 5.35 (D) mm
Active area 43.2 x 57.6 mm
Dot pitch 0.18 x 0.18 mm
LCD type TFT, Normally White, Transflective
TFT Driver IC HX8367-A or equivalent
TFT Interface MCU/SPI/RGB
View Direction 3 o’clock
Gray Scale Inversion Direction 9 o’clock
Aspect Ratio 3:4
Backlight Type LED,Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

Operating conditions

ItemSymbolMinTypMaxUnit
Supply voltage for logic VCI 2.5 2.8 3.3 V
I/O power supply IOVCC 1.65 1.8 3.3 V
Input current Idd 6.7 10.1 mA
Input voltage 'H' level VIH 0.7IOVCC IOVCC V
Input voltage 'L' level VIL GND 0.3IOVCC V
Output voltage 'H' level VOH 0.8IOVCC IOVCC V
Output voltage 'L' level VOL GND 0.2IOVCC V


SKU: WF283-240320AD#000-FC
Brand: Winstar
Disponibile: No
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€58,40
€51,60
€47,00

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€58,40 IVA esclusa

DESCRIPTION

2.83 inch portrait mode Transflective TFT-LCD display module, made of resolution 240x320 pixels. This module built in with HX8367-A driver IC, it supports MCU/SPI/RGB interface; View Direction 3 o'clock, Gray Scale Inversion Direction 9 o'clock, Aspect Ratio 3:4, brightness 500 nits (typical value), Glare surface panel. Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃.

Transflective TFT-LCD display; it is characterized by very good readability in bright environments and direct sunlight. Transflective TFT display featured a transparent reflector in front of the backlight. The incoming light is reflected and used to illuminate the TFT display. Therefore, the readability of the content in very bright light is perfect even without any backlight. Customers using a transflective TFT module can save power by reducing or turning off the display's backlight during bright environments.

Ttransflective TFT v.s. Transmissive TFT

 

DRAWING

2.83 inch Transflective TFT LCD Display 240x320 - WF0283ATDAJDNN0

 

SPECIFICATIONS

Interface

LCM PIN Definition

NOSymbolFunctionI/O
1 IM0 System interface select.
I
2 IM1
3 IM2
4 IM3
5 RESET Reset pin. Setting either pin low initializes the LSI.
Must be reset after power is supplied.
I
6 VSYNC Vertical synchronizing signal in RGB interface. I
7 HSYNC Horizontal synchronizing signal in RGB interface I
8 DOTCLK Data enable signal in RGB interface I
9 ENABLE A data ENABLE signal in RGB I/F mode I
10-27 DB17-DB0 18-bit bi-directional data bus. I/O
28 SDO Serial data output pin in serial bus system interface O
29 SDI Serial data input pin in serial bus system interface.
The data is inputted on the rising edge of the SCL signal.
I
30 RD Read enable pin I80 parallel bus system interface. I
31 WR/SCL (WR)Write enable pin I80 parallel bus system
interface.(SCL)server as serial data clock in serial bus system interface.
I
32 RS Command / parameter or display data selection pin. I
33 CS Chip select signal.Low: chip can be accessed;High:
chip cannot be accessed
I
34 FMARK Tearing effect output. O
35 IOVCC Digital IO Pad power supply. P
36 VCC Analog power supply P
37 VCI Analog power supply. P
38 GND Power ground. P
39 NC No connection -
40 NC No connection -
41 NC No connection -
42 NC No connection -
43 LEDA LED light, anode.  
44 LEDK1 LED light, cathode  
45 LEDK2 LED light, cathode  
46 LEDK3 LED light, cathode  
47 NC No connection  

 

General Specifications

ItemDimensionUnit
Size 2.83 inch
Dot Matrix 240 x RGB x 320(TFT) dots
Module dimension 53.1(W) x 71.1(H) x 5.35 (D) mm
Active area 43.2 x 57.6 mm
Dot pitch 0.18 x 0.18 mm
LCD type TFT, Normally White, Transflective
TFT Driver IC HX8367-A or equivalent
TFT Interface MCU/SPI/RGB
View Direction 3 o’clock
Gray Scale Inversion Direction 9 o’clock
Aspect Ratio 3:4
Backlight Type LED,Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

Operating conditions

ItemSymbolMinTypMaxUnit
Supply voltage for logic VCI 2.5 2.8 3.3 V
I/O power supply IOVCC 1.65 1.8 3.3 V
Input current Idd 6.7 10.1 mA
Input voltage 'H' level VIH 0.7IOVCC IOVCC V
Input voltage 'L' level VIL GND 0.3IOVCC V
Output voltage 'H' level VOH 0.8IOVCC IOVCC V
Output voltage 'L' level VOL GND 0.2IOVCC V


Specifiche di prodotto
Brand Winstar
Size 2.8"
Risoluzione 240x320
Area Attiva (mm) 43.20x57.60
Colore Full Color
Interfaccia RGB/MCU/SPI
Controllore a Bordo HX8367-A
Angolo Visione 3H
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per Soldering
Nr. Pin 47
Passo Pin 0.8mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 2.8"
Risoluzione 240x320
Area Attiva (mm) 43.20x57.60
Colore Full Color
Interfaccia RGB/MCU/SPI
Controllore a Bordo HX8367-A
Angolo Visione 3H
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per Soldering
Nr. Pin 47
Passo Pin 0.8mm
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;