Menu
Search
English
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close

    DMG48270F043_02WTC

    Be the first to review this product
    TFT 4.3" 480x272, Intelligent T5L UART COF, 200cd/m², Wide View Angle (IPS), Capacitive Touch Panel
    Manufacturer: DWIN
    SKU: DMG48270F043_02WTC

    Accessory kit

    PRICE BREAKS
    Quantity
    1+
    5+
    10+
    Price
    €33.50
    €30.20
    €28.40

    For quantities above 24pcs pls send your enquiry to [email protected] or call +39 0332 1888005

    Availability: In stock
    €33.50 excl tax
    i h

     

    Display

     
    Color  262K colors
    LCD Type  IPS-TFT-LCD,
    Viewing Angle  Wide viewing angel, typical value of 85°/85°/85°/85°(L/R/U/D)
    Active Area（A.A）  95.04mm (W)×53.86mm (H)
    Resolution  480×272
    Backlight  LED
    Brightness  250nit

     

    Voltage & Current

     
    Power Voltage  3.6~5.5V, typical value of 5V
    Operation Current VCC=5V, max backlight, 220mA
    VCC=5V, backlight off, 100mA
     
     

    Interface

     
     
    User interface  50Pin_0.5mm FPC
    Baudrate  3150~3225600bps
    Output Voltage  Output 1; 3.0~3.3 V
    Output 0; 0~0.3 V
    Input Voltage （RXD）  Input 1; 3.3V
    Input 0; 0~0.5V
    Interface  UART2: TTL;
    UART4: TTL;（ Only available after OS configuration）
    UART5: TTL;（Only available after OS configuration
    Data Format  UART2: N81;
    UART4: N81/E81/O81/N82;4 modes (OS configuration)
    UART5: N81/E81/O81/N82;4 modes (OS configuration)
     
     

    Display Connection

     

     

     
     

    Accessories (Selectable in Above Menu)

     

     

     

    DRAWING

     
     

     

    External Interface


    Pin  Definition  I/O  Functional Description
    1 +5V  I  Power supply, DC3.6-5.5V
    2 +5V  I
    3 GND  GND  GND
    4 GND  GND
    5 GND  GND
    6 AD7  I  5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling.
    7 AD6  I
    8 AD5  I
    9 AD3  I
    10 AD2  I
    11 +3.3 O  3.3V output, maximum load of 150mA.
    12  SPK  O  External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on 
    13 SD_CD  I/O  SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface.
    14 SD_CK  O
    15  SD_D3  I/O
    16 SD_D2  I/O
    17 SD_D1  I/O
    18 SD_D0  I/O
    19  PWM0  O  2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3
    20 PWM1  O
    21 P3.3  I/O  If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V.
    22 P3.2  I/O
    23 P3.1/EX1  I/O  It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
    24 P3.0/EX0  I/O  It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
    25 P2.7  I/O  IO interface
    26 P2.6  I/O  IO interface
    27 P2.5  I/O  IO interface
    28 P2.4  I/O  IO interface
    29 P2.3  I/O  IO interface
    30  P2.2  I/O  IO interface
    31 P2.1 I/O  IO interface
    32  P2.0  I/O  IO interface
    33  P1.7  I/O  IO interface
    34 P1.6  I/O  IO interface
    35 P1.5 I/O  IO interface
    36 P1.4  I/O  IO interface
    37  P1.3  I/O  IO interface
    38 P1.2  I/O  IO interface
    39  P1.1 I/O  IO interface
    40 P1.0  I/O  IO interface
    41 UART4_TXD  O  UART4
    42 UART4_RXD  I
    43 UART5_TXD  O  UART5
    44 UART5_RXD  I
    45 P0.0  I/O  IO interface
    46 P0.1  I/O  IO interface
    47 CAN_TX  O  CAN interface
    48 CAN_RX  I
    49 UART2_TXD  O  UART2(UART0 serial port of OS core)
    50 UART2_RXD  I
     
    Products specifications
    Size 4.3"
    Resolution 480x272
    Viewing Area (mm) 95.04x53.86
    Active Area (mm) 95.04x53.86
    Color Full Color
    Nr. Of Color 262K
    Operating System DGUSII OS
    Power supply 5V
    Display Interface UART // CAN // PWM // AD // IO
    Display IC DWIN ASIC T5L0
    View Angle IPS
    Touch Panel Capacitive
    O. Temperature (°C) -10~60
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Only registered users can write reviews
    Related Products
    HDL662S

    HDL662S

    HDL662S
    USB-50pin Adapter Board for DWIN COF T5L UART Series
    Call for pricing
    HDLUSB1

    HDLUSB1

    HDLUSB1
    USB Male - USB Male Cable, Length 50cm
    Call for pricing
    SD_CARD

    SD_CARD

    SD_CARD
    16Gb Micro SD Card with Adapter
    From €14.60 excl tax
    ED4 USB

    ED4 USB

    ED4 USB
    DWIN Intelligent T5L USB Downloader
    Call for pricing
    Categories
    Information
    Customer service
    My account
    Payment options
    Copyright © 2026 First Components. All rights reserved.