Menu
Search
Filters
Close
Menu

WEO128128W#D0DK-FC

Picture of WEO128128W#D0DK-FC Picture of WEO128128W#D0DK-FC Picture of WEO128128W#D0DK-FC Picture of WEO128128W#D0DK-FC
PMOLED 1.18'' 128x128, Circular, White color, Circular Knob COG, 3V, Interface SPI,I2C, Capacitive touch panel Encoder (I2C IC IT7259)

DESCRIPTION

 

The round OLED model is an extension item which equipped with capacitive touch screen and a control knob on module, it’s an Ø1.18” circular COG type OLED display; made of resolution 128x128 dots. This module is built in with SSD1327 IC, it supports 4-line SPI and I2C interface, supply voltage for logic 3V (typical value), 1/128 driving duty. This CTP+Knob model is built in with IT7259 touch panel IC on module, which supports I2C interface, one detect point for capacitive touch screen.

This round OLED Knob is ideal for applications which required a control knob on devices such as smart home applications, intelligent technology devices, audio system, etc. Operating temperatures from -20℃ to +50℃;  storage temperatures range from -30℃ to +70℃.

 

DRAWING

1.18 inch 128x128 OLED Knob with CTP Touch Panel



SPECIFICATIONS

 

Interface Pin Function

No.SymbolFunction
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source. VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select. Bus Interface selection
BS1Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, will be interpreted as data. When the pin is pulled LOW, will be transferred to a command register In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

 

Encoder PIN Definition

No.SymbolFunction
1 FSW_A Encoder terminal signal-A
2 FSW_B Encoder terminal signal-B
3 FSW_C Encoder terminal signal-C
4 FSW_D Ground

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 128 Dots
Module dimension Ø56 × 21.56 mm
Active Area Ø30.0 mm
Pixel Size 0.210 × 0.210 mm
Pixel Pitch 0.235 × 0.235 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128 Duty
Gray Scale 4 bits
IC SSD1327
Interface 4-line SPI , I2C
Size 1.18 inch
 
CTP IC IT7259
Detect Point 1
CTP Interface I2C
CTP Surface Hardness 6H

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Operation VCI -0.3 4.0 V
Supply Voltage for Logic VDD -0.5 2.75 V
Supply Voltage for Display VCC -0.5 19.0 V
Operating Temperature TOP -20 +50 °C
Storage Temperature TSTG -30 +70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VCI － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 14.0 14.5 15.0 V
High Level Input VIH － 0.8×VCI － VCI V
Low Level Input VIL － 0 － 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI － VCI V
Low Level Output VOL Iout = 100uA 0 － 0.1×VCI V
50% Check Board operating Current VCC =14.5V － 24 36 mA
 

 

Touch Panel Controller IT7259

ItemSymbolConditionMinTypMaxUnit
Input High Volt. VIH COMS 1.2 － － V
Input Low Volt. VIL COMS － － 0.5 V
Output High Volt. VOH IOH = 2mA 2.4 － － V
Output Low Volt. VOL IOL = 2mA － － 0.4 V

 

SKU: WEO128128W#D0DK-FC
Brand: Winstar
Available: Yes
Be the first to review this product
Price Breaks
Quantity
1+
5+
10+
Price
€39.70
€33.10
€31.80

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€39.70 excl tax

DESCRIPTION

 

The round OLED model is an extension item which equipped with capacitive touch screen and a control knob on module, it’s an Ø1.18” circular COG type OLED display; made of resolution 128x128 dots. This module is built in with SSD1327 IC, it supports 4-line SPI and I2C interface, supply voltage for logic 3V (typical value), 1/128 driving duty. This CTP+Knob model is built in with IT7259 touch panel IC on module, which supports I2C interface, one detect point for capacitive touch screen.

This round OLED Knob is ideal for applications which required a control knob on devices such as smart home applications, intelligent technology devices, audio system, etc. Operating temperatures from -20℃ to +50℃;  storage temperatures range from -30℃ to +70℃.

 

DRAWING

1.18 inch 128x128 OLED Knob with CTP Touch Panel



SPECIFICATIONS

 

Interface Pin Function

No.SymbolFunction
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source. VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select. Bus Interface selection
BS1Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, will be interpreted as data. When the pin is pulled LOW, will be transferred to a command register In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

 

Encoder PIN Definition

No.SymbolFunction
1 FSW_A Encoder terminal signal-A
2 FSW_B Encoder terminal signal-B
3 FSW_C Encoder terminal signal-C
4 FSW_D Ground

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 128 Dots
Module dimension Ø56 × 21.56 mm
Active Area Ø30.0 mm
Pixel Size 0.210 × 0.210 mm
Pixel Pitch 0.235 × 0.235 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128 Duty
Gray Scale 4 bits
IC SSD1327
Interface 4-line SPI , I2C
Size 1.18 inch
 
CTP IC IT7259
Detect Point 1
CTP Interface I2C
CTP Surface Hardness 6H

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Operation VCI -0.3 4.0 V
Supply Voltage for Logic VDD -0.5 2.75 V
Supply Voltage for Display VCC -0.5 19.0 V
Operating Temperature TOP -20 +50 °C
Storage Temperature TSTG -30 +70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VCI － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 14.0 14.5 15.0 V
High Level Input VIH － 0.8×VCI － VCI V
Low Level Input VIL － 0 － 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI － VCI V
Low Level Output VOL Iout = 100uA 0 － 0.1×VCI V
50% Check Board operating Current VCC =14.5V － 24 36 mA
 

 

Touch Panel Controller IT7259

ItemSymbolConditionMinTypMaxUnit
Input High Volt. VIH COMS 1.2 － － V
Input Low Volt. VIL COMS － － 0.5 V
Output High Volt. VOH IOH = 2mA 2.4 － － V
Output Low Volt. VOL IOL = 2mA － － 0.4 V

 

Products specifications
Brand Winstar
Size 1.18"
Resolution 128x128
Active Area (mm) 30.00x30.00
Dot Size 0.21x0.21
Polarizer Glare
Color White
Power supply 3V
Display Interface SPI/I2C
Display IC Controller SSD1327
Constructive Structure Circular Knob COG
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~50
Display Connection FPC per ZIF Connector
Pin Nr. 18
Pin Pitch 0.5mm
Touch Panel IC Controller IT7259
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Winstar
Size 1.18"
Resolution 128x128
Active Area (mm) 30.00x30.00
Dot Size 0.21x0.21
Polarizer Glare
Color White
Power supply 3V
Display Interface SPI/I2C
Display IC Controller SSD1327
Constructive Structure Circular Knob COG
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~50
Display Connection FPC per ZIF Connector
Pin Nr. 18
Pin Pitch 0.5mm
Touch Panel IC Controller IT7259
Preferred - Not Preferred Preferred
Related products
Picture of WEO128128W#D0D-FC

WEO128128W#D0D-FC

PMOLED 1.18'' Graphic 128x128, Circular, White color, COG, 3V, Interface SPI,I2C, Capacitive touch panel (I2C IC IT7259)
From €30.20 excl tax
Picture of WEO128128W#D0D-D-FC

WEO128128W#D0D-D-FC

Evaluation kit for PMOLED 1.18'' 128x128, Circular, White color, Circular Knob COG, 3V, Interface I2C, Capacitive touch panel Encoder (I2C IC IT7259) (OLED included)
From €42.50 excl tax
Categories
Recently viewed
Contacts
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • VAT number IT02764420127
    REA Varese 285686
    Social capital fully paid 100.000€
Information
New products
Copyright © 2021 FIRST Components. All rights reserved.
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;