Cerca
Italiano
Catalogo
    Menu Chiudi
    TFT 2.1" 480x480, Round Intelligent T5L UART COF, 350cd/m², Wide View Angle (IPS), Capacitive Touch Panel (GFF with bonding OCA)
    Brand: DWIN
    Cod.: DMG48480F021_01WTC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €44,30
    €39,90
    €37,50

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €44,30 IVA esclusa
    i h
     
     

    Media

     

     

    ASIC Information

     
    T5L0 ASIC  Developed by DWIN. Mass production in 2020,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times

     

    Display

     
    Color 262K colors
    LCD Type IPS, TFT LCD
    Viewing Angle Wide viewing angle, 85°/85°/85°/85° (L/R/U/D)
    Display Area(A.A) 53.28mm (W)×53.28mm (H)
    Resolution 480*480
    Backlight LED
    Brightness 350nit

     

    Voltage & Current

     
    Power Voltage 3.6~5.5V, typical value of 5V
    Operation Current VCC = 5V, Backlight on,170mA
    VCC = 5V, Backlight off,110mA
     
     

    Interface

     
    User interface 50Pin_0.5mm FPC
    Baudrate 3150~3225600bps
    Output Voltage Output 1;3.0~3.3 V
    Output 0;0~0.3 V
    Input Voltage
    (RXD) 
    Input 1;3.3V
    Input 0;0~0.5V
    Interface UART2: TTL;
    UART4: TTL;(Only available after OS configuration)
    UART5: TTL;(Only available after OS configuration)
    Flash 8MB
     
     

    Display Connection

     

     
     

     

     
     

    Accessories (Selectable in Above Menu)

     

     

     
     

    DRAWING

     
     
     

    External Interface

     
    Pin Definition I/O Functional Description
    1 5V I Power supply, DC3.6-5.5V
    2 5V I
    3 GND GND GND
    4 GND GND
    5 GND GND
    6 AD7 I 5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling.
    7 AD6 I
    8 AD5 I
    9 AD3 I
    10 AD1 I
    11 +3.3 O 3.3V output, maximum load of 150mA.
    12 SPK O External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level.
    13 SD_CD I/O SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface.
    14 SD_CK O
    15 SD_D3 I/O
    16 SD_D2 I/O
    17 SD_D1 I/O
    18 SD_D0 I/O
    19 PWM0 O 2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level.
    The OS core can be controlled in real time via UART3
    20 PWM1 O
    21 P3.3 I/O If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V.
    22 P3.2 I/O
    23 P3.1/EX1 I/O It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
    24 P3.0/EX0 I/O It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes
    25 P2.7 I/O IO interface
    26 P2.6 I/O IO interface
    27 P2.5 I/O IO interface
    28 P2.4 I/O IO interface
    29 P2.3 I/O IO interface
    30 P2.2 I/O IO interface
    31 P2.1 I/O IO interface
    32 P2.0 I/O IO interface
    33 P1.7 I/O IO interface
    34 P1.6 I/O IO interface
    35 P1.5 I/O IO interface
    36 P1.4 I/O IO interface
    37 P1.3 I/O IO interface
    38 P1.2 I/O IO interface
    39 P1.1 I/O IO interface
    40 P1.0 I/O IO interface
    41 UART4_TXD O UART4
    42 UART4_RXD I
    43 UART5_TXD O UART5
    44 UART5_RXD I
    45 P0.0 I/O IO interface
    46 P0.1 I/O IO interface
    47 CAN_TX O CAN interface
    48 CAN_RX I
    49 UART2_TXD O UART2(UART0 serial port of OS core)
    50 UART2_RXD I
    Specifiche di prodotto
    Size 2.1"
    Resolution 480x480
    Active Area (mm) Ø53.28
    Color Full Color
    Nr. Of Color 262K
    Operating System DGUSII OS
    Power supply 5V
    Display Interface UART // CAN // PWM // AD // IO
    Display IC DWIN ASIC T5L0
    View Angle IPS
    Touch Panel Capacitive (Optical Bonding)
    O. Temperature (°C) -10~60
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni