Cerca
Filters
Close

Wireless & IOT

Soluzioni complete di moduli di alta qualita', progetti di ingegneria e servizi di supply chain. Il nostro catalogo prodotti comprende moduli Wi-Fi/ Bluetooth/ LoRa/ ISM RF/ GPS-GNSS/ NFC-RFID/ 4G LTE, Antenne ecc.. applicabili nell'elettronica industriale, nella sicurezza, nell'Internet of Things ed in svariate altre applicazioni.

Comprehensive multi-protocol wireless solution including 802.11 b/g/n, dual-mode Bluetooth 5...
 
Wi-Fi is a wireless network technology based on the IEEE 802.11 standard which allows computers, mobile devices, or other electronic devices can exchange information without using any wires or transmission cables. With implement several different protocols defined by the IEEE 802.11 standard and the required machine-to-machine (M2M) protocols, it is the primary solution for convenience, cost efficiency, and ease of integration with other networks and network components.
 
 
 
Embedded Wi-Fi/Bluetooth Module
REYAX’s Embedded Wi-Fi/Bluetooth module is compliant to single-spatial stream IEEE 802.11 b/g/n which supports concurrent Wi-Fi and Bluetooth 5.  It is suitable for MCU-equipped devices that are concerned about power consumption and can supports co-existence of multiple wireless protocols managed including MQTT or HTTP for easily build up the IoT connection.

- Mini PCIe/M.2 Wi-Fi Card
REYAX’s Wi-Fi Mini PCIe/M.2 Card provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz & 5 GHz), 802.11j, dual-mode Bluetooth® 5 by using USB2.0 HS interface. Meeting the industrial grade, it is suitable for Linux systems and is widely used in the IPC market.

- Sub 1G 802.11 ah Halow® Wi-Fi Module
Wi-Fi HaLow® refers to products using IEEE 802.11 ah technology. By operating in frequency bands below 1GHz, Wi-Fi HaLow® provides a longer transmission distance with a higher volume of data. It provides a reliable connection in challenging environments where the ability to penetrate walls or other obstacles in low-power connectivity including sensor networks and wearable devices.
Fast and easy connection with smartphones and all sorts of Bluetooth devices...
 
Bluetooth is a wireless communication technology standard to allow electronic devices can exchange data over a short distance and build up a personal area network. By using short-baud high-frequency radio waves to communicate over the ISM frequency band, Bluetooth-enabled devices can automatically detect/connect to each other and automatically break if the devices move too far apart. REYAX specializes in supporting Bluetooth firmware customized services. By integrating Bluetooth Firmware and UART interface, customers can easily control the module through AT command.
 
 
- General Purpose Bluetooth® Module
REYAX's general-purpose Bluetooth module is mostly used in applications such as mobile phone connection, data transmission and remote monitoring/control. It can work in an inactive internet connection environment and be used to exchange signals/data between portable devices or to connect electronic devices within a short range.

- Long-Range Bluetooth® Module
REYAX's long-range Bluetooth module features high power and surperior sensitivity. Supporting special long-range mode, the module can reach up to 300-500m transmission distance and be widely used in long-range transmission applications such as smart lighting controls and car monitoring.

- Bluetooth® Dual-Mode Module
REYAX's Bluetooth dual-mode module supports both Bluetooth 2.0 BR/EDR and Bluetooth Low Energy (BLE). This module takes advantage of low power consumption to connect/control different devices and  Bluetooth Classic for high data rate applications.
High performance and sensitivity LoRa module with Antenna. Low power long distance...
 
 
LoRa® (Long-Range) is a spread spectrum modulation technique for Low Power Wide Area Network (LPWAN) that offers features for wireless applications in long-range, low-power consumption and secure communication. LoRa® has a greater range than Cellular networks and can help designers easily integrate into different infrastructures with low-cost battery-operated applications.
 
 
 
 
- LoRa® Proprietary
REYAX LoRa® Proprietary modules are designed with own proprietary protocol. These modules enable designers to enter the market before the standards are fully established, therefore is suitable for small-scale and private network usage.

- LoRaWAN®
LoRaWAN® is a set of protocol standards based on LoRa® physical layer transmission technology and its key components include Gateways and Nodes. By connecting to numerous of standard Nodes, LoRaWAN® Gateway helps designers can quickly build up an ultra-long wireless solution with less infrastructure equipment.

- Pure Hardware
REYAX pure hardware LoRa® modules allow designers to write firmware into the MCU based on their project requirements. It is a suitable solution for designers who need flexibility in development.
Monolithic low-IF architecture CMOS FSK/GFSK TRX for wireless applications in the ISM...
 
 
 
 
  • Monolithic low-IF architecture CMOS FSK/GFSK TRX for wireless applications in the ISM bands
  • Sub-1 GHz RF transceiver, 433/868/915MHz, Amiccom A7129 core
Global Navigation Satellite System (GNSS) is a constellation of satellites...
 
 
Global Navigation Satellite System (GNSS) is a constellation of satellites that can transmit positioning/timing data to receivers from space and use the data to determine the accurate location. The worldwide GNSS systems include Europe’s Galileo; the USA’s NAVSTAR Global Positioning System (GPS) ; Russia’s Global'naya Navigatsionnaya Sputnikovaya Sistema (GLONASS) and China’s BeiDou Navigation Satellite System.
 
 
 
General Purpose External Antenna Module
The external antenna usually enjoys higher freedom of design, therefore has more potential in customizing the radiation pattern or bandwidth. Since the antenna do not have to be connected to the IoT/RF device and can be placed in optimal locations at appropriate distances using coaxial cables, it is available in a variety of styles and configurations.
- General Purpose Embedded Antenna Module
The embedded antenna offers a solution to save space and cost constraints while remaining good performance. It allows for a clean package with no external attachments and is always connected to be used. It is ideal for those compact devices design that require stringent size with high-performance standards.
- Dual Band GNSS (L1/L5) Module
The dual band is a multiple-frequency system that has consistent tracklogs to improve positioning. Since it can track more than one radio signal from each satellite on different frequencies, it can reduce the factors caused by environmental interference and have better accuracy when using the device in complex environments.
- UDR Module
UDR (Untethered Dead Reckoning) is a method that provides continuous navigation data by using sensors to calculate the distance traveled from a known position. It calculates the current position by incorporating estimates of speed, heading direction, and course over elapsed time. It is widely used in buildings, tunnels, basement parking lots... kinds of sheltered environments that easily reduce positioning accuracy.
The principle of UWB (Ultra-wideband) is to use Time of Flight (ToF)...
 
The principle of UWB (Ultra-wideband) is to use Time of Flight (ToF) for precise ranging positioning. It is a fast, secure, and low-power radio protocol used to measure distance or determine location with high accuracy compared to other wireless technology. By sending signal at a certain frequency and continuously the time gap between signal sending and receiving with devices in known locations, UWB can accurately calculate the distance between the two points or even accurately calculate the location of the positioning tag through a certain algorithm.
Built-in programming options suitable for wide range of applications...
 
RFID (Radio Frequency Identification) is a system composed of a radio transponder, receiver and transmitter. By trigging an electromagnetic interrogation pulse from a nearby RFID reader device, the tag transmits digital data, usually an identifying inventory number, back to the reader. This technology helps the device read the information contained in a wireless device or tag from a distance without making physical contact or requiring a line of sight. Passive RFID systems use tags that are powered by electromagnetic energy from an RFID reader without any internal power source, therefore don't require batteries and are cheaper. It is widely used for applications such as supply chain management, human tracking, access control, and smart labels.
 
UID Reader RFID Module
RFID UID Reader is the basic function in all RFID modules that can read information from the RFID tag UID (unique identifier) to verify a user’s identity and grant access. UID reader RFID module helps designers can shorten the project schedule by solving signal fine-tuning and optimization issues.
- Memory Block Encryption RFID Module
RFID Encryption is used for encrypting user data stored on identification tags. With an encryption key unique on the tag identification of each tag, only a specific unique key can used to encrypt data for storage on the corresponding tag or to decrypt encrypted user data stored on the tag. It helps improve connection security because data transfer between tags and trusted readers could be encrypted so that any rogue readers can't intercept the message.
- Apple&Google Wallet NFC Module
Replacing the traditional RFID entity sensing card, the Apple® Wallet VAS and Google® SmartTap pass can work over a short distance and can be used to present contactless passes independently with only user’s phone. When the device is held near the NFC terminal, the terminal will initiate receiving the pass information by sending a request for a pass., therefore the users can easily integrate keys, tickets, gift cards or loyalty cards by just tapping their phone. This technology guarantees higher security by encrypt the transaction process and complete it in code.
- UHF RFID Long-range Reader Module
UHF (Ultra-High Frequency) RFID reader uses a frequency band between 840MHz to 960 MHz. It has a much more reading range compared to HF NFC readers and can enable one reader to interact with numerous tags at the same time. The UHF RFID reader is multi-purpose for long-distance RFID application fields such as ETC (Electronic Toll Collection System) or inventory management. 
LTE CAT4/ GNSS, CAT-M1 / NB-IoT NB2, build-in nano SIM card holder...
 
 
 
 
  • LTE CAT4/ GNSS, CAT-M1 / NB-IoT NB2, build-in nano SIM card holder
SMA external antenna, helica antenna, glonass antenna...
 
 
 
 
  • SMA external antenna...
  • Helica antenna...
  • Glonass antenna...
UART to USB dongle, cables, testing kits...
 
 
 
 
  • UART to USB dongle...
  • Testing kits...
;