DMG85480F050_01WTC

Name: DMG85480F050_01WTC
SKU: DMG85480F050_01WTC
Price: 33.50 EUR
Availability: InStock

Si tratta dela prima recensione per questo prodotto

TFT 5" 480x854, Intelligent T5L UART COF, 350cd/m², Wide View Angle (IPS), Capacitive Touch Panel (GG with bonding OCA)

Brand: DWIN

Cod.: DMG85480F050_01WTC

Kit accessori

Added Board
Added Accessory 1
Added Accessory 2

Prezzi per quantità

Quantità

10+

Prezzo

€33,50

€30,20

€28,40

Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

Disponibilità: Disponibile

€33,50 IVA esclusa

Quantità:

i h

Overview
Specifiche
Download
Contattaci

Media

ASIC Information

T5L0 ASIC

T5L0 ASIC is a low-power, cost-effective, GUI and application highly integrated single-chip dual-core ASIC designed by DWIN Technology for small-size LCD and mass produced in 2020.

Display

Color			262K colors
LCD Type			IPS-TFT-LCD,
Viewing Angle			Wide viewing angel, typical value of 85°/85°/85°/85°(L/R/U/D)
Resolution			480×854
Backlight			LED
Brightness			350nit

Voltage & Current

Power Voltage			3.6~5.5V, typical value of 5V
Operation Current			VCC=5V, max backlight, 300mA
			VCC=5V, backlight off,95mA

Interface

User interface			50Pin_0.5mm FPC
Baudrate			3150~3225600bps
Output Voltage			Output 1;3.0~3.3 V
			Output 0;0~0.3 V
Input Voltage （RXD）			Input 1；3.3V
			Input 0；0~0.5V
Interface			UART2: TTL; UART4: TTL;（ Only available after OS configuration） UART5: TTL;（Only available after OS configuration
Data Format			UART2: N81; UART4: N81/E81/O81/N82;4 modes (OS configuration) UART5: N81/E81/O81/N82;4 modes (OS configuration)

Display Connection

Accessories (Selectable in Above Menu)

DRAWING

External Interface

Pin	Definition	I/O	Functional Description
1	5V	I	Power supply, DC3.6-5.5V
2	5V	I	Power supply, DC3.6-5.5V
3	GND	GND	GND
4	GND	GND
5	GND	GND
6	AD7	I	5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling.
7	AD6	I
8	AD5	I
9	AD3	I
10	AD1	I
11	+3.3	O	3.3V output, maximum load of 150mA.
12	SPK	O	External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level.
13	SD_CD	I/O	SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface.
14	SD_CK	O
15	SD_D3	I/O
16	SD_D2	I/O
17	SD_D1	I/O
18	SD_D0	I/O
19	PWM0	O	2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3
20	PWM1	O
21	P3.3	I/O	If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V.
22	P3.2	I/O
23	P3.1/EX1	I/O	It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
24	P3.0/EX0	I/O	It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
25	P2.7	I/O	IO interface
26	P2.6	I/O	IO interface
27	P2.5	I/O	IO interface
28	P2.4	I/O	IO interface
29	P2.3	I/O	IO interface
30	P2.2	I/O	IO interface
31	P2.1	I/O	IO interface
32	P2.0	I/O	IO interface
33	P1.7	I/O	IO interface
34	P1.6	I/O	IO interface
35	P1.5	I/O	IO interface
36	P1.4	I/O	IO interface
37	P1.3	I/O	IO interface
38	P1.2	I/O	IO interface
39	P1.1	I/O	IO interface
40	P1.0	I/O	IO interface
41	UART4_TXD	O	UART4
42	UART4_RXD	I	UART4
43	UART5_TXD	O	UART5
44	UART5_RXD	I	UART5
45	P0.0	I/O	IO interface
46	P0.1	I/O	IO interface
47	CAN_TX	O	CAN interface
48	CAN_RX	I	CAN interface
49	UART2_TXD	O	UART2(UART2 serial port of OS core)
50	UART2_RXD	I	UART2(UART2 serial port of OS core)

Specifiche di prodotto

Size	5"
Resolution	480x854
Viewing Area (mm)	61.23x109.25
Active Area (mm)	61.23x109.25
Color	Full Color
Nr. Of Color	262K
Operating System	DGUSII OS
Power supply	5V
Display Interface	UART // CAN // PWM // AD // IO
Display IC	DWIN ASIC T5L0
View Angle	IPS
Touch Panel	Capacitive (Optical Bonding)
O. Temperature (°C)	-10~60
Preferred - Not Preferred	Preferred

Product Files

Nome completo *

La tua e-mail *

Oggetto: *

Richiesta *

Solo gli utenti registrati possono scrivere recensioni

Prodotti correlati

Ultimi prodotti visti