Cerca
Filters
Close

WEA160128L#AP3N00000-FC

PMOLED 1.92'' Graphic 160x128, Yellow, COG + PCB, 3V, Interface 6800,8080,I2C,SPI, Glare

DESCRIPTION

It’s diagonal size 1.92 inch, made of 160x128 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. This module is built in with SH1108 IC; it supports 4-wire SPI interface, 1/128 driving duty, supply voltage for logic is from 3V, the display current with 50% checkerboard is 100 mA @3.0 VDD (typical value). The module is having a PCB board on module which is suitable for customers to use wire connection; customers do not need to develop extra PCB for their applications. The module provides a standard metal PIN (2.54mm pin hole) for customer to connect to the product. The PCB has been designed with a boost circuit, and customers only need to provide a set of VDD voltage to use.

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. WEA160128A module can be operating at temperatures from -40°C to +80°C; its storage temperatures range from -40°C to +85°C.

DRAWING

 

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 GND Ground.
2 VCC Power supply pin for logic.
3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
4 D1
5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C = “H”: the inputs at D0 and D1 are treated as display data.
D/C = “L”: the inputs at D0 and D1 are transferred to the command registers.
7 CS# This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data command I/O is enabled.

 

General Specification

ItemDimensionUnit
Dot Matrix 160 × 128 Dots
Module dimension 34.90 × 57.80 × 5.36 Max. mm
Active Area 28.908 × 39.34 mm
Pixel Size 0.206 × 0.226 mm
Pixel Pitch 0.226 × 0.246 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128 Duty
IC SH1108
Interface 4-line SPI
Size 1.92 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VCC -0.3 3.6 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C
 

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VCC 1.65 3.0 3.3 V
Input High Volt. VIH 0.8×VCC VCC V
Input Low Volt. VIL GND 0.2×VCC V
Output High Volt. VOH 0.8×VCC VCC V
Output Low Volt. VOL GND 0.2×VCC V
50% Check Board operating Current ICC VCC=3V 100 200 mA
SKU: WEA160128L#AP3N00000-FC
Brand: Winstar
Disponibile: No
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€19,40
€15,50
€15,00

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€19,40 IVA esclusa

DESCRIPTION

It’s diagonal size 1.92 inch, made of 160x128 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. This module is built in with SH1108 IC; it supports 4-wire SPI interface, 1/128 driving duty, supply voltage for logic is from 3V, the display current with 50% checkerboard is 100 mA @3.0 VDD (typical value). The module is having a PCB board on module which is suitable for customers to use wire connection; customers do not need to develop extra PCB for their applications. The module provides a standard metal PIN (2.54mm pin hole) for customer to connect to the product. The PCB has been designed with a boost circuit, and customers only need to provide a set of VDD voltage to use.

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. WEA160128A module can be operating at temperatures from -40°C to +80°C; its storage temperatures range from -40°C to +85°C.

DRAWING

 

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 GND Ground.
2 VCC Power supply pin for logic.
3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
4 D1
5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C = “H”: the inputs at D0 and D1 are treated as display data.
D/C = “L”: the inputs at D0 and D1 are transferred to the command registers.
7 CS# This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data command I/O is enabled.

 

General Specification

ItemDimensionUnit
Dot Matrix 160 × 128 Dots
Module dimension 34.90 × 57.80 × 5.36 Max. mm
Active Area 28.908 × 39.34 mm
Pixel Size 0.206 × 0.226 mm
Pixel Pitch 0.226 × 0.246 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128 Duty
IC SH1108
Interface 4-line SPI
Size 1.92 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VCC -0.3 3.6 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C
 

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VCC 1.65 3.0 3.3 V
Input High Volt. VIH 0.8×VCC VCC V
Input Low Volt. VIL GND 0.2×VCC V
Output High Volt. VOH 0.8×VCC VCC V
Output Low Volt. VOL GND 0.2×VCC V
50% Check Board operating Current ICC VCC=3V 100 200 mA
Specifiche di prodotto
Brand Winstar
Size 1.92"
Risoluzione 160x128
Area Attiva (mm) 28.92x39.34
Dot Size 0.21x0.23
Polarizzatore Glare
Colore Yellow
Alimentazione 3V
Interfaccia Display I2C
Display IC SH1108
Struttura Costruttiva COG + PCB
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -40~80
Connessione Display Strip Connector
Nr. Pin 8
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 1.92"
Risoluzione 160x128
Area Attiva (mm) 28.92x39.34
Dot Size 0.21x0.23
Polarizzatore Glare
Colore Yellow
Alimentazione 3V
Interfaccia Display I2C
Display IC SH1108
Struttura Costruttiva COG + PCB
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -40~80
Connessione Display Strip Connector
Nr. Pin 8
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
;