Menu
Cerca
Filters
Close
Menu

WEN25664L#BA3N00000-FC

Immagine di WEN25664L#BA3N00000-FC Immagine di WEN25664L#BA3N00000-FC
PMOLED 3.12'' Graphic 256x64, Yellow color, COF + PCB, 3V, Interface 6800,8080,SPI, Anti-glare

DESCRIPTION

COF type Graphic OLED with PCB on module; it’s diagonal size 3.12 inch, made of 256x64 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. Furthermore, the integration of interface setting with VCC circuit on PCB board makes it even simpler to use. This PCB module is built in with SSD1322 IC; it supports 6800/8080 parallel and 3-wire/4-wire SPI interface, 16 (4bits) gray scale, driving duty 1/64, supply voltage for logic is from 3.3V, the display with 50% check board current is 150mA @VDD 3V (typical value).

This COF OLED module is suitable for medical applications, control panel, smart home applications, etc. Operating temperatures from -40℃ to +80℃; storage temperatures range from -40℃ to +85℃.

 

DRAWING

 

SPECIFICATIONS

Interface Pin Function

Pin
Number		SymbolI/OFunction
1 VSS P Ground.
2 VDD P Power Supply for Core Logic Circuit
Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
3 N.C. P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
4 D/C# I Data/Command Control
This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
5 R/W#
(WR#)		 I Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
6 E/RD# I Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
7~14 DB0 I/O Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
DB1
DB2
DB3
DB4
DB5
DB6
DB7
15 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS# I Data/Command Control
This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.

18		 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
19 BS1 I Communicating Protocol Select
These pins are MCU interface selection input. See the following table:
BS:[1:0]Bus Interface Selection
00 4 line SPI
01 3 line SPI
10 8-bit 8080 parallel
11 8-bit 6800 parallel
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS0
21~24 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.

 

General Specification

ItemDimensionUnit
Dot Matrix 256 x 64 Dots －
Module dimension 89.2 × 44.0 × 3.3 Max. mm
Active Area 76.78 × 19.18 mm
Pixel Size 0.278 × 0.278 mm
Pixel Pitch 0.3 × 0.3 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
Gray Scale 4 bits
IC SSD1322 (COF)
Interface 6800, 8080, SPI
Size 3.12 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Display VDD -0.3 4 V
Operating Temperature TOP -40 80 °C
Storage Temperature TSTG -40 85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD － 2.8 3.0 3.3 V
High Level Input VIH － 0.8×VDD － VDD V
Low Level Input VIL － 0 － 0.2×VDD V
High Level Output VOH － 0.9×VDD － VDD V
Low Level Output VOL － 0 － 0.1×VDD V
50% Check Board operating Current IDD VCC =3V － 150 300 mA
 

 

SKU: WEN25664L#BA3N00000-FC
Brand: Winstar
Disponibile: Si
Si tratta dela prima recensione per questo prodotto
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€42,80
€35,60
€34,30

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€42,80 IVA esclusa

DESCRIPTION

COF type Graphic OLED with PCB on module; it’s diagonal size 3.12 inch, made of 256x64 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. Furthermore, the integration of interface setting with VCC circuit on PCB board makes it even simpler to use. This PCB module is built in with SSD1322 IC; it supports 6800/8080 parallel and 3-wire/4-wire SPI interface, 16 (4bits) gray scale, driving duty 1/64, supply voltage for logic is from 3.3V, the display with 50% check board current is 150mA @VDD 3V (typical value).

This COF OLED module is suitable for medical applications, control panel, smart home applications, etc. Operating temperatures from -40℃ to +80℃; storage temperatures range from -40℃ to +85℃.

 

DRAWING

 

SPECIFICATIONS

Interface Pin Function

Pin
Number		SymbolI/OFunction
1 VSS P Ground.
2 VDD P Power Supply for Core Logic Circuit
Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
3 N.C. P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
4 D/C# I Data/Command Control
This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
5 R/W#
(WR#)		 I Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
6 E/RD# I Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
7~14 DB0 I/O Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
DB1
DB2
DB3
DB4
DB5
DB6
DB7
15 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS# I Data/Command Control
This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.

18		 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
19 BS1 I Communicating Protocol Select
These pins are MCU interface selection input. See the following table:
BS:[1:0]Bus Interface Selection
00 4 line SPI
01 3 line SPI
10 8-bit 8080 parallel
11 8-bit 6800 parallel
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS0
21~24 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.

 

General Specification

ItemDimensionUnit
Dot Matrix 256 x 64 Dots －
Module dimension 89.2 × 44.0 × 3.3 Max. mm
Active Area 76.78 × 19.18 mm
Pixel Size 0.278 × 0.278 mm
Pixel Pitch 0.3 × 0.3 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
Gray Scale 4 bits
IC SSD1322 (COF)
Interface 6800, 8080, SPI
Size 3.12 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Display VDD -0.3 4 V
Operating Temperature TOP -40 80 °C
Storage Temperature TSTG -40 85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD － 2.8 3.0 3.3 V
High Level Input VIH － 0.8×VDD － VDD V
Low Level Input VIL － 0 － 0.2×VDD V
High Level Output VOH － 0.9×VDD － VDD V
Low Level Output VOL － 0 － 0.1×VDD V
50% Check Board operating Current IDD VCC =3V － 150 300 mA
 

 

Specifiche di prodotto
Brand Winstar
Size 3.12"
Risoluzione 256x64
Area Attiva (mm) 76.77x19.17
Dot Size 0.27x0.27
Polarizzatore Anti-glare
Colore Yellow
Alimentazione 3V
Interfaccia Display 6800/8080/SPI
Display IC SSD1322
Struttura Costruttiva COF + PCB
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -40~80
Connessione Display Soldering PAD
Nr. Pin 24
Passo Pin 2.54mm
Preferred - Not Preferred Not Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 3.12"
Risoluzione 256x64
Area Attiva (mm) 76.77x19.17
Dot Size 0.27x0.27
Polarizzatore Anti-glare
Colore Yellow
Alimentazione 3V
Interfaccia Display 6800/8080/SPI
Display IC SSD1322
Struttura Costruttiva COF + PCB
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -40~80
Connessione Display Soldering PAD
Nr. Pin 24
Passo Pin 2.54mm
Preferred - Not Preferred Not Preferred
Prodotti correlati
Immagine di TSL025664BF111XXXX00

TSL025664BF111XXXX00

Capacitive Touch panel 3.12'', O.D. 89.20x29.00mm for PMOLED, I2C interface, Detect point 2 finger, Glass-Glass structure, FPC per ZIF Connector (WEX025664B / WEN025664B OLED families)
Da €17,90 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Prodotti in Vetrina
Copyright © 2023 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
;