Menu
Cerca
Filters
Close
Menu

WEO4864S#A00-FC

Immagine di WEO4864S#A00-FC Immagine di WEO4864S#A00-FC
PMOLED 0.71'' 48x64, Sky Blue color, COG, 3V, Interface I2C (FPC per Soldering)

DESCRIPTION

 

Small Graphic PMOLED display which is made of 48x64 dots, diagonal size 0.71 inch. It has the module dimension of 13.90 × 22.0 mm and Active Area size 10.54×14.70 mm; it is built in with SSD1306 controller IC; it supports I2C interface, 3V power supply. It is a COG structure PMOLED display which is ultra thin and no need of backlight (self emitting); it’s lightweight and low power consumption. This small COG Graphic OLED module is suitable for wearable device, mp3, portable device, personal care appliance, voice recorder pen, health device, etc. This 0.71” module is portrait mode; it also support landscape mode, welcome to contact us for more technical support. Operating temperatures from -40℃ to +80℃; storage temperatures range from -40℃ to +85℃.

 

DRAWING

Winstar Display - 0.71" Graphic OLED 48x64, 0.71 oled



SPECIFICATIONS

 

Interface Pin Function

No.SymbolFunction
1 C2N Positive Terminal of the Flying Inverting Capacitorr Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.
2 C2P
3 C1P
4 C1N
5 VBAT Power Supply for DC/DC Converter Circuit
This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6 NC No connection.
7 VSS Ground of Logic Circuit
This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
8 VDD Power Supply for Logic
This is a voltage supply pin. It must be connected to external source.
9 RES# Power Reset for Controller and Driver
This pin is reset signal input. When the pin is low, initialization of the chip is executed.
10 SCL Host Data Input/Output Bus
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL.
11 SDA
12 IREF This is segment output current reference pin. 
When external IREF is used, a resistor should be connected between this pin and Vss to maintain the IREF current at a maximum of 30uA. 
When internal IREF is used, this pin should be kept NC
13 VCOMH Voltage Output High Level for COM Signal
This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.
14 VCC Power Supply for OEL Panel
This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 48 × 64 Dots －
Module dimension 13.90 × 22.0 × 1.26 mm
Active Area 10.54 × 14.70 mm
Pixel Size 0.198 × 0.208 mm
Pixel Pitch 0.220 × 0.230 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Interface I2C
Size 0.71 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 0 4 V
Supply Voltage for Display VCC 0 15 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 7.0 7.5 8.0 V
Input High Volt. VIH － 0.8 xVDD － VDD V
Input Low Volt. VIL － 0 － 0.2 xVDD V
Output High Volt. VOH － 0.9 xVDD － VDD V
Output Low Volt. VOL － 0 － 0.1 xVDD V
50% Check Board operating Current ICC VCC=7.5V － 15.0 25.0 mA

 

FPC options

DrawingFPC LengthPINpitchZIF FPC or HOTBAR FPCInterfaceFPC No.Create Date
FPC2000701401XXXXX00_WEO004864ALPP3N00000 16.0 14 0.7 HOTBAR FPC I2C FPC2000701401XXXXX00 20160603
FPC2070001401XXXXX02_WEO004864AWPP3N00H00 11.2 14 0.7 HOTBAR FPC I2C FPC2070001401XXXXX02 20180307


SKU: WEO4864S#A00-FC
Brand: Winstar
Disponibile: Si
Si tratta dela prima recensione per questo prodotto
Prezzi per quantità
Quantità
1+
5+
10+
50+
100+
Prezzo
€3,70
€2,70
€2,70
€2,50
€2,30

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€3,70 IVA esclusa

DESCRIPTION

 

Small Graphic PMOLED display which is made of 48x64 dots, diagonal size 0.71 inch. It has the module dimension of 13.90 × 22.0 mm and Active Area size 10.54×14.70 mm; it is built in with SSD1306 controller IC; it supports I2C interface, 3V power supply. It is a COG structure PMOLED display which is ultra thin and no need of backlight (self emitting); it’s lightweight and low power consumption. This small COG Graphic OLED module is suitable for wearable device, mp3, portable device, personal care appliance, voice recorder pen, health device, etc. This 0.71” module is portrait mode; it also support landscape mode, welcome to contact us for more technical support. Operating temperatures from -40℃ to +80℃; storage temperatures range from -40℃ to +85℃.

 

DRAWING

Winstar Display - 0.71" Graphic OLED 48x64, 0.71 oled



SPECIFICATIONS

 

Interface Pin Function

No.SymbolFunction
1 C2N Positive Terminal of the Flying Inverting Capacitorr Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.
2 C2P
3 C1P
4 C1N
5 VBAT Power Supply for DC/DC Converter Circuit
This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6 NC No connection.
7 VSS Ground of Logic Circuit
This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
8 VDD Power Supply for Logic
This is a voltage supply pin. It must be connected to external source.
9 RES# Power Reset for Controller and Driver
This pin is reset signal input. When the pin is low, initialization of the chip is executed.
10 SCL Host Data Input/Output Bus
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL.
11 SDA
12 IREF This is segment output current reference pin. 
When external IREF is used, a resistor should be connected between this pin and Vss to maintain the IREF current at a maximum of 30uA. 
When internal IREF is used, this pin should be kept NC
13 VCOMH Voltage Output High Level for COM Signal
This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.
14 VCC Power Supply for OEL Panel
This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 48 × 64 Dots －
Module dimension 13.90 × 22.0 × 1.26 mm
Active Area 10.54 × 14.70 mm
Pixel Size 0.198 × 0.208 mm
Pixel Pitch 0.220 × 0.230 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Interface I2C
Size 0.71 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 0 4 V
Supply Voltage for Display VCC 0 15 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VDD － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 7.0 7.5 8.0 V
Input High Volt. VIH － 0.8 xVDD － VDD V
Input Low Volt. VIL － 0 － 0.2 xVDD V
Output High Volt. VOH － 0.9 xVDD － VDD V
Output Low Volt. VOL － 0 － 0.1 xVDD V
50% Check Board operating Current ICC VCC=7.5V － 15.0 25.0 mA

 

FPC options

DrawingFPC LengthPINpitchZIF FPC or HOTBAR FPCInterfaceFPC No.Create Date
FPC2000701401XXXXX00_WEO004864ALPP3N00000 16.0 14 0.7 HOTBAR FPC I2C FPC2000701401XXXXX00 20160603
FPC2070001401XXXXX02_WEO004864AWPP3N00H00 11.2 14 0.7 HOTBAR FPC I2C FPC2070001401XXXXX02 20180307


Specifiche di prodotto
Brand Winstar
Size 0.71"
Risoluzione 48x64
Area Attiva (mm) 10.54x14.70
Dot Size 0.19x0.20
Polarizzatore Glare
Colore Sky Blue
Alimentazione 3V
Interfaccia I2C
Controllore a Bordo SSD1306BZ
Struttura COG
Frame No
Touch Panel No touch
Connessione Display FPC per Soldering
Nr. Pin 14
Passo Pin 0.7mm
Preferred - Not Preferred Not Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 0.71"
Risoluzione 48x64
Area Attiva (mm) 10.54x14.70
Dot Size 0.19x0.20
Polarizzatore Glare
Colore Sky Blue
Alimentazione 3V
Interfaccia I2C
Controllore a Bordo SSD1306BZ
Struttura COG
Frame No
Touch Panel No touch
Connessione Display FPC per Soldering
Nr. Pin 14
Passo Pin 0.7mm
Preferred - Not Preferred Not Preferred
Prodotti correlati
Immagine di WEA4864S#A00-FC

WEA4864S#A00-FC

PMOLED 0.71'' Graphic 64x48, Sky Blue color, COG + PCB, 3V, Interface I2C (Pin)
Chiedi quotazione
Immagine di WEO4864L#A00-FC

WEO4864L#A00-FC

PMOLED 0.71'' 48x64, Yellow color, COG, 3V, Interface I2C (FPC per Soldering)
Da €2,30 IVA esclusa
Immagine di WEO4864W#A00-FC

WEO4864W#A00-FC

PMOLED 0.71'' 48x64, White color, COG, 3V, Interface I2C (FPC per Soldering)
Da €2,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2020 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;