Cerca
Italiano
Catalogo
    Menu Chiudi

    WEO9616W#BP3N0Y000-FC

    PMOLED 0.69" Graphic 96x16, White color, COG, 3V, Interface I2C, Glare, Consumer grade (FPC per Soldering)
    Brand: Winstar
    Cod.: WEO9616W#BP3N0Y000-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €4,90
    €4,40
    €4,10
    €4,00

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €4,90 IVA esclusa
    i h

    DESCRIPTION

    Consumer-grade COG OLED display, diagonal size 0.69 inch, made of resolution 96x16 pixels. This 0.69 inch OLED Display module is built-in with SSD1306 IC; it supports the I2C interface, the supply voltage for logic 3V (VDD), the supply voltage for display 7.5V (VCC), the display with 50% Checkboard current is 5mA @7.5V VCC (typical value), driving duty 1/16. 

    This model is a small-size 0.69 inch COG OLED display that is ultra-thin, lightweight, and has low power consumption. It is very suitable for smart home applications, medical devices, portable devices, wearable devices, etc.  It can be operated at temperatures from -30℃ to +70℃; its storage temperatures range from -30℃ to +70℃.

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 C2N C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor.
    C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor.
    2 C2P
    3 C1P
    4 C1N
    5 VBAT This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
    6 NC No connection
    7 VSS This is a ground pin.
    8 VDD Power supply pin for core logic operation.
    9 RES# This pin is reset signal input. When the pin is low, initialization of the chip is executed.
    Keep this pin HIGH (i.e. connect to VDD) during normal operation.
    10 SCL When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
    11 SDA
    12 IREF This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA.
    When internal IREF is used, this pin should be kept NC.
    13 VCOMH The pin for COM signal deselected voltage level.
    A capacitor should be connected between this pin and VSS.
    14 VCC This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 96 × 16 Dots -
    Module dimension 26.3 × 8.0 × 1.26 mm
    Active Area 17.26 × 3.18 mm
    Pixel Size 0.16 × 0.18 mm
    Pixel Pitch 0.18 × 0.20 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/16 Duty
    IC SSD1306
    Interface I2C
    Size 0.69 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VDD 0 4 V
    Supply Voltage for Display VCC 0 16 V

    Charge Pump Regulator Supply Voltage

    VBAT 0 5 V
    Operating Temperature TOP -30 70 °C
    Storage Temperature TSTG -30 70 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 1.65 3.0 3.3 V
    Supply Voltage for Display
    (Supplied Externally)
    VCC - 6.0 7.5 8.0 V
    Charge Pump Regulator Supply Voltage VBAT - 3.0 - 4.2 V
    Charge Pump Output Voltage for Display (Generated by Internal DC/DC) Charge Pump
    VCC
    - 7.0 7.5 - V
    Input High Volt. VIH - 0.8×VDD - VDD V
    Input Low Volt. VIL - 0 - 0.2×VDD V
    Output High Volt. VOH - 0.9×VDD - VDD V
    Output Low Volt. VOL - 0 - 0.1×VDD V
    50% check Board operating Current
    (VCC Supplied Externally)
    ICC - - 5 10 mA
    50% check Board operating Current (VCC Generated by Internal DC/DC) IBAT -   5 10 mA



    Specifiche di prodotto
    Size 0.69"
    Resolution 96x16
    Active Area (mm) 17.26x3.18
    Dot Size 0.16x0.18
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface I2C
    Display IC SSD1306
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -30~70
    Data Connection FPC for Soldering
    Pin Nr. 14
    Pin Pitch 0.62mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni