Menu
Cerca
Filters
Close
Menu

WEP2004W#C00-FC

Immagine di WEP2004W#C00-FC Immagine di WEP2004W#C00-FC
PMOLED 2.89'' Character 20x4, White color, COG + PCB, 5V, Interface 6800,8080,SPI,I2C (Pin)

DESCRIPTION

 

Character COG OLED with PCB board on module; it is diagonal size 2.89" which made of 20 characters x 4 lines, it's very readable due to the high contrast 2000:1. The module is built in with SSD1311 IC; it supports 6800/8080 4bit/8-bit parallel, 4-Wire SPI, and I2C interface, 1/32 driving duty, supply voltage for Logic 5V, optional 3.3V. This model is built-in ROMs for ASCII, English and European and Japanese characters.

It is a COG Character OLED display which is having mounting holes on PCB board; that makes it easily to fix module on customers' applications.

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. This module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

 

DRAWING

20 characters x 4 Lines OLED Display COG+FR+PCB - WEP002004C

 

SPECIFICATIONS

Interface Pin Function

Pin No.SymbolPin TypeDescription
1 VSS P Ground
2 VDD P Power supply and power supply for interface logic level.
3 REGVDD I Internal VDD regulator selection pin in 5V I/O application mode.
When this pin is pulled HIGH, internal VDD regulator is enabled (5V I/O application).
When this pin is pulled LOW, internal VDD regulator is disabled (Low voltage I/O application).
4 D/C# I This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.
When serial interface is selected, this pin must be connected to VSS.
5 R/W# (WR#) I This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
6 E/RD# I This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
7 D0 I/O These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SID and D2 will be the serial data output: SOD. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
8 D1
9 D2
10 D3
11 D4
12 D5
13 D6
14 D7
15 CS# I This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
In I2C mode, this pin must be connected to VSS.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 BS0 I setting as described in the following table. BS2, BS1 and BS0 are pin select.
Bus Interface selection
BS[2:0]Interface
000 Serial Interface
001 Invalid
010 I2C
011 Invalid
100 8-bit 6800 parallel
101 4-bit 6800 parallel
110 8-bit 8080 parallel
111 4-bit 8080 parallel
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
18 BS1
19 BS2
20 VSS
(FRGnd)		 P Ground

 

Mechanical Data

ItemDimensionUnit
Number of Characters 20 Characters x 4 Lines －
Module dimension 92.0 x 31.5 x 7.0 Max. mm
View area 72.42 x 22.82 mm
Active area 70.42 x 20.82 mm
Dot size 0.57 x 0.57 mm
Dot pitch 0.60 x 0.60 mm
Character size 2.97 x 4.77 mm
Character pitch 3.55 x 5.35 mm
LCD type OLED , Monochrome
Duty 1/32
IC SSD1311
Interface 6800, 8080, SPI, I2C
Size 2.89 inch

 

Absolute Maximum Ratings

ItemSymbolMinMaxUnit
Operating Temperature TOP -40 +80 °C
Storage Temperature TST -40 +85 °C
Supply Voltage For Logic VDD-VSS -0.3 5.5 V

 

Electrical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 4.8 5.0 5.3 V
Input High Volt. VIH － 0.8xVDD － VDD V
Input Low Volt. VIL － GND － 0.2xVDD V
Output High Volt. VOH IOH=-0.5mA 0.8xVDD － VDD V
Output Low Volt. VOL IOL=0.5mA GND － 0.2xVDD V
50% Check Board
Operating Current		 IDD VDD=5V - 60 110 mA
SKU: WEP2004W#C00-FC
Brand: Winstar
Disponibile: Si
Si tratta dela prima recensione per questo prodotto
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€18,70
€14,90
€14,60

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€18,70 IVA esclusa

DESCRIPTION

 

Character COG OLED with PCB board on module; it is diagonal size 2.89" which made of 20 characters x 4 lines, it's very readable due to the high contrast 2000:1. The module is built in with SSD1311 IC; it supports 6800/8080 4bit/8-bit parallel, 4-Wire SPI, and I2C interface, 1/32 driving duty, supply voltage for Logic 5V, optional 3.3V. This model is built-in ROMs for ASCII, English and European and Japanese characters.

It is a COG Character OLED display which is having mounting holes on PCB board; that makes it easily to fix module on customers' applications.

This OLED module is suitable for smart home application, medical device, smart control, meter, etc. This module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

 

DRAWING

20 characters x 4 Lines OLED Display COG+FR+PCB - WEP002004C

 

SPECIFICATIONS

Interface Pin Function

Pin No.SymbolPin TypeDescription
1 VSS P Ground
2 VDD P Power supply and power supply for interface logic level.
3 REGVDD I Internal VDD regulator selection pin in 5V I/O application mode.
When this pin is pulled HIGH, internal VDD regulator is enabled (5V I/O application).
When this pin is pulled LOW, internal VDD regulator is disabled (Low voltage I/O application).
4 D/C# I This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.
When serial interface is selected, this pin must be connected to VSS.
5 R/W# (WR#) I This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
6 E/RD# I This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
7 D0 I/O These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SID and D2 will be the serial data output: SOD. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
8 D1
9 D2
10 D3
11 D4
12 D5
13 D6
14 D7
15 CS# I This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
In I2C mode, this pin must be connected to VSS.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 BS0 I setting as described in the following table. BS2, BS1 and BS0 are pin select.
Bus Interface selection
BS[2:0]Interface
000 Serial Interface
001 Invalid
010 I2C
011 Invalid
100 8-bit 6800 parallel
101 4-bit 6800 parallel
110 8-bit 8080 parallel
111 4-bit 8080 parallel
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
18 BS1
19 BS2
20 VSS
(FRGnd)		 P Ground

 

Mechanical Data

ItemDimensionUnit
Number of Characters 20 Characters x 4 Lines －
Module dimension 92.0 x 31.5 x 7.0 Max. mm
View area 72.42 x 22.82 mm
Active area 70.42 x 20.82 mm
Dot size 0.57 x 0.57 mm
Dot pitch 0.60 x 0.60 mm
Character size 2.97 x 4.77 mm
Character pitch 3.55 x 5.35 mm
LCD type OLED , Monochrome
Duty 1/32
IC SSD1311
Interface 6800, 8080, SPI, I2C
Size 2.89 inch

 

Absolute Maximum Ratings

ItemSymbolMinMaxUnit
Operating Temperature TOP -40 +80 °C
Storage Temperature TST -40 +85 °C
Supply Voltage For Logic VDD-VSS -0.3 5.5 V

 

Electrical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 4.8 5.0 5.3 V
Input High Volt. VIH － 0.8xVDD － VDD V
Input Low Volt. VIL － GND － 0.2xVDD V
Output High Volt. VOH IOH=-0.5mA 0.8xVDD － VDD V
Output Low Volt. VOL IOL=0.5mA GND － 0.2xVDD V
50% Check Board
Operating Current		 IDD VDD=5V - 60 110 mA
Specifiche di prodotto
Brand Winstar
Size 2.89"
Risoluzione 20x4
Area Attiva (mm) 70.42x20.82
Dot Size 0.57x0.57
Polarizzatore Glare
Colore White
Alimentazione 5V
Interfaccia 6800/8080/SPI/I2C
Controllore a Bordo SSD1311
Struttura COG + PCB
Frame Yes
Touch Panel No touch
Connessione Display Pin
Nr. Pin 20
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 2.89"
Risoluzione 20x4
Area Attiva (mm) 70.42x20.82
Dot Size 0.57x0.57
Polarizzatore Glare
Colore White
Alimentazione 5V
Interfaccia 6800/8080/SPI/I2C
Controllore a Bordo SSD1311
Struttura COG + PCB
Frame Yes
Touch Panel No touch
Connessione Display Pin
Nr. Pin 20
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2020 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;