Cerca
Filters
Close

WF18-128160FD#002-FC

TFT 1.77'' 128x160, Portrait, LCD + IC Controller, Interface MCU/SPI IC ST7735S, 40cd/m², Capacitive touch panel (GF)

DESCRIPTION

 

Full color 128x160 TFT-LCD display module, diagonal size 1.77 inch with Capacitive touch panel. This module is built in with ST7735S IC; it supports 8080 8/16-bit parallel and serial 3-wire SPI interface. Active area size of 28.03 x 35.04 mm; it's supply voltage range from for analog is 2.5V to 4.8V.

It is a portrait mode LCD module, if you would like to use it as landscape mode, please contact us for more technical support. This 1.77” TFT LCD module is featured with brightness up to 400 cd/m2(typical value). Operating temperatures from -20℃ to 70℃; storage temperatures from -30℃ to 80℃.

 

DRAWING

INTERFACE

 

PinSymbolI/OFunction
1 VLED- P Back light cathode
2 VLED P Back light anode
3 IM0 I - MCU Parallel Interface Type Selection
-If Not Used, Please Fix this Pin at VDDI or DGND Level. 
4 IM1
5 IM2 I MCU Parallel Interface Bus and Serial Interface select
IM2='1', Parallel Interface
IM2='0', Serial Interface
6 RESET P Reset signal
7-12 NC - No Connect
13-28 DB15-DB0(SPI_SDA) I/O DB15:0] are used as MCU parallel interface data bus.
-DBis the serial input/output signal in serial interface mode.
-In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level. 
29 NC - No Connect
30 RD I Read Enable in 8080 MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
31 WR I Serial clock
-Write Enable in MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
32 D/C(SPI_SCL) I -Display data/command Selection Pin in MCU Interface.
-D/CX='1': Display Data or Parameter.
-D/CX='0': Command Data.
-In Serial Interface, this is used as SCL.
-If not used, please fix this pin at VDDI or DGND level.
33 CS(SPI_CS) I Chip enable
34 IOVCC P Interface Operation Voltage 
35 VCI P Analog Supply Voltage
36 GND P Ground
37-40 NC - No Connect

 

SKU: WF18-128160FD#002-FC
Brand: Winstar
Disponibile: No
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€17,70
€14,20
€13,00

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€17,70 IVA esclusa

DESCRIPTION

 

Full color 128x160 TFT-LCD display module, diagonal size 1.77 inch with Capacitive touch panel. This module is built in with ST7735S IC; it supports 8080 8/16-bit parallel and serial 3-wire SPI interface. Active area size of 28.03 x 35.04 mm; it's supply voltage range from for analog is 2.5V to 4.8V.

It is a portrait mode LCD module, if you would like to use it as landscape mode, please contact us for more technical support. This 1.77” TFT LCD module is featured with brightness up to 400 cd/m2(typical value). Operating temperatures from -20℃ to 70℃; storage temperatures from -30℃ to 80℃.

 

DRAWING

INTERFACE

 

PinSymbolI/OFunction
1 VLED- P Back light cathode
2 VLED P Back light anode
3 IM0 I - MCU Parallel Interface Type Selection
-If Not Used, Please Fix this Pin at VDDI or DGND Level. 
4 IM1
5 IM2 I MCU Parallel Interface Bus and Serial Interface select
IM2='1', Parallel Interface
IM2='0', Serial Interface
6 RESET P Reset signal
7-12 NC - No Connect
13-28 DB15-DB0(SPI_SDA) I/O DB15:0] are used as MCU parallel interface data bus.
-DBis the serial input/output signal in serial interface mode.
-In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level. 
29 NC - No Connect
30 RD I Read Enable in 8080 MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
31 WR I Serial clock
-Write Enable in MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
32 D/C(SPI_SCL) I -Display data/command Selection Pin in MCU Interface.
-D/CX='1': Display Data or Parameter.
-D/CX='0': Command Data.
-In Serial Interface, this is used as SCL.
-If not used, please fix this pin at VDDI or DGND level.
33 CS(SPI_CS) I Chip enable
34 IOVCC P Interface Operation Voltage 
35 VCI P Analog Supply Voltage
36 GND P Ground
37-40 NC - No Connect

 

Specifiche di prodotto
Brand Winstar
Size 1.77"
Risoluzione 128x160
Area Attiva (mm) 28.03x35.04
Colore Full Color
Interfaccia MCU/SPI
Controllore a Bordo ST7735S
Angolo Visione TN
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 1.77"
Risoluzione 128x160
Area Attiva (mm) 28.03x35.04
Colore Full Color
Interfaccia MCU/SPI
Controllore a Bordo ST7735S
Angolo Visione TN
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;