Cerca
Italiano
Catalogo
    Menu Chiudi

    WF24KTLAJDNN0#

    TFT 2.4" 240x320 Portrait LCD Panel, Interface MCU (SPI) IC Himax8347-I, 500cd/m², No touch
    Brand: Winstar
    Cod.: WF24-240320KS#000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €17,30
    €15,50
    €14,60
    €14,30

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €17,30 IVA esclusa
    i h

    RECOMMENDED ONLY AS SPARE PARTS

    For new projects please contact us at [email protected].

     

    DESCRIPTION

    2.4 inch TFT-LCD module with resolution 240x320 pixels. This module is built in with Himax8347-I IC; it supports 4-wire SPI interface, supply voltage for analog (VDD) range from 2.5V to 3.0V. This module is having Glare surface panel, View Direction 6 o'clock, Gray scale inversion 12 o'clock, contrast ratio 500:1.

    This TFT-LCD module is Portrait mode with brightness 500 nits (typical value). The module also is available for Resistive Touch Screen (RTP) optional. Operating temperatures from -20℃ to +70℃; storage temperatures from -30℃ to +80℃.

     

    DRAWING

    SPECIFICATIONS

     

    Interface

    NOSymbolFunction
    1 GND Ground
    2 LED+ Anode of LED backlight.
    3 LED- Cathode of LED backlight.
    4 GND Ground
    5 VDD Power supply(TYP:2.8V).
    6 RESET System reset pin.
    7 SDA Serial data input pin and output pin(SDA) in serial bus system interface I.
    Serial data input pin (SDI) in serial bus system interface II. The data is inputted on the rising edge of the SCL signal.
    If not used, please let it open or connected to VSSD.
    8 SCL (NWR) Write enable pin I80 parallel bus system interface.
    (SCL) server as serial data clock in serial bus system interface when IFSEL=0.
    Fix it to IOVCC or VSSD level when not used.
    9 CS Chip select signal.
    Low: chip can be accessed;
    High: chip cannot be accessed. Must be connected to VSSD if not in use.
    10 RS Command / parameter or display data selection pin
    11 GND Ground
    12 SDO Serial data output pin (SDO) in serial bus system interface II.
    If not used, please open this pin.
    13 TE Tearing effect output.
    If not used please open this pin
    14 IM3 serial interface I  /  serial interface II 
    15 GND Ground
    16 NC No connect
    17 NC No connect
    18 NC No connect
    19 NC No connect
    20 GND Ground

     

    General Specifications

    ItemDimensionUnit
    Size 2.4 inch
    Dot Matrix 240 × RGB × 320(TFT) dots
    Module dimension 42.72(W) × 60.26(H) × 2.25(D) mm
    Active area 36.72 × 48.96 mm
    Dot pitch 0.153 × 0.153 mm
    LCD type TFT, Normally White, Transmissive
    View Direction 6 o'clock
    Gray Scale Inversion Direction 12 o'clock
    Interface SPI
    Aspect Ratio Portrait
    Backlight Type LED, Normally White
    Touch Panel Without Touch Panel
    Surface Glare

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - +70 ℃
    Storage Temperature TST -30 - +80 ℃

     

    Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage For Analog VDD - 2.5   3.0 V
    Supply Current For LCM IDD - - 5 7.5 mA
    Specifiche di prodotto
    Size 2.4"
    Resolution 240x320
    Active Area (mm) 36.72x48.96
    Color Full Color
    Display Interface MCU (SPI)
    Display IC HX8347-I
    View Angle TN
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 20
    Pin Pitch 0.5mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni