Menu
Cerca
Filters
Close
Menu

WF28-240320KS#000-FC

Immagine di WF28-240320KS#000-FC Immagine di WF28-240320KS#000-FC
TFT 2.8'' 240x320, Portrait, LCD + IC Controller, Interface MCU (SPI) IC ST7789V, 500cd/m², No touch

DESCRIPTION

2.8 inch portrait mode SPI TFT-LCD module; resolution 240x320 pixels. This module is built-in with ST7789V IC; it supports 4-Line SPI interface, supply voltage for analog (Vcc) range from 2.4V to 3.6V, typical value 3.3V. This module is having glare surface panel, view direction 6 o'clock, gray scale inversion 12 o'clock, contrast ratio 500:1.
 
Portrait mode TFT-LCD featured with brightness 500 nits (typical value). Itcan be operated at temperatures from -20°C to +70°C, its storage temperatures range from -30°C to +80°C. It is ideal for mp4 players, security door system, mini audio player, and baby monitor, etc.
 

SPECIFICATIONS

Interface

LCM PIN Definition

NOSymbolFunction
1 GND Ground
2 VLED+ Anode of LED backlight.
3 VLED- Cathode of LED backlight.
4 GND Ground
5 VCC Power supply
6 RESET System reset pin. (RESX)
signal is active low
7 SDA When IM3: Low, SPI interface input/output pin.
When IM3: High, SPI interface input pin.
The data is latched on the rising edge of the SCL signal.
If not used, please fix this pin at VDDI or DGND level.
8 DCX(SCL) This pin is used to be serial interface clock.
DCX=’1’: display data or parameter.
DCX=’0’: command data.
If not used, please fix this pin at VDDI or DGND.
9 CSX Chip selection pin
Low enable.
High disable.
10 WRX(D/CX) Display data/command selection pin in 4-line serial interface.
Second Data lane in 2 data lane serial interface.
If not used, please fix this pin at VDDI or DGND.
11 GND Ground
12 SDO(DOUT) SPI interface output pin.
The data is output on the falling edge of the SCL signal.
If not used, let this pin open.
13 TE Tearing effect signal is used to synchronize MCU to frame memory
writing.
If not used, please let this pin open
14 IM3 The MCU interface mode select.
IM3IM2IM1IM0MPU Interface ModeData pin
0 1 1 0 4-line 8bit serial I/F SDA: in/out
1 1 1 0 4-line 8bit serial I/F II SDA: in/SDO: out
15 GND Ground
16 XR -
17 YD -
18 XL -
19 YU -
20 GND Ground

 

General Specifications

ItemDimensionUnit
Size 2.8 inch
Dot Matrix 240 x RGB x 320(TFT) dots
Module dimension 50.0(W) x 69.2(H) mm
Active area 43.2 x 57.6 mm
Dot pitch 0.18 x 0.18 mm
LCD type TFT, Normally White, Transmissive
Interface SPI
TFT Driver IC ST7789V or Equivalent
View Direction 6 o’clock
Gray Scale Inversion Direction 12 o’clock
Aspect Ratio Portrait
Backlight Type LED,Normally White
Touch Panel No touch

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage For Analog VCC 2.4 3.3 3.6 V
Supply Current For LCM ICC － 6.7 10.0 mA
SKU: WF28-240320KS#000-FC
Brand: Winstar
Disponibile: No
Si tratta dela prima recensione per questo prodotto
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€15,70
€11,50
€9,90

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€15,70 IVA esclusa

DESCRIPTION

2.8 inch portrait mode SPI TFT-LCD module; resolution 240x320 pixels. This module is built-in with ST7789V IC; it supports 4-Line SPI interface, supply voltage for analog (Vcc) range from 2.4V to 3.6V, typical value 3.3V. This module is having glare surface panel, view direction 6 o'clock, gray scale inversion 12 o'clock, contrast ratio 500:1.
 
Portrait mode TFT-LCD featured with brightness 500 nits (typical value). Itcan be operated at temperatures from -20°C to +70°C, its storage temperatures range from -30°C to +80°C. It is ideal for mp4 players, security door system, mini audio player, and baby monitor, etc.
 

SPECIFICATIONS

Interface

LCM PIN Definition

NOSymbolFunction
1 GND Ground
2 VLED+ Anode of LED backlight.
3 VLED- Cathode of LED backlight.
4 GND Ground
5 VCC Power supply
6 RESET System reset pin. (RESX)
signal is active low
7 SDA When IM3: Low, SPI interface input/output pin.
When IM3: High, SPI interface input pin.
The data is latched on the rising edge of the SCL signal.
If not used, please fix this pin at VDDI or DGND level.
8 DCX(SCL) This pin is used to be serial interface clock.
DCX=’1’: display data or parameter.
DCX=’0’: command data.
If not used, please fix this pin at VDDI or DGND.
9 CSX Chip selection pin
Low enable.
High disable.
10 WRX(D/CX) Display data/command selection pin in 4-line serial interface.
Second Data lane in 2 data lane serial interface.
If not used, please fix this pin at VDDI or DGND.
11 GND Ground
12 SDO(DOUT) SPI interface output pin.
The data is output on the falling edge of the SCL signal.
If not used, let this pin open.
13 TE Tearing effect signal is used to synchronize MCU to frame memory
writing.
If not used, please let this pin open
14 IM3 The MCU interface mode select.
IM3IM2IM1IM0MPU Interface ModeData pin
0 1 1 0 4-line 8bit serial I/F SDA: in/out
1 1 1 0 4-line 8bit serial I/F II SDA: in/SDO: out
15 GND Ground
16 XR -
17 YD -
18 XL -
19 YU -
20 GND Ground

 

General Specifications

ItemDimensionUnit
Size 2.8 inch
Dot Matrix 240 x RGB x 320(TFT) dots
Module dimension 50.0(W) x 69.2(H) mm
Active area 43.2 x 57.6 mm
Dot pitch 0.18 x 0.18 mm
LCD type TFT, Normally White, Transmissive
Interface SPI
TFT Driver IC ST7789V or Equivalent
View Direction 6 o’clock
Gray Scale Inversion Direction 12 o’clock
Aspect Ratio Portrait
Backlight Type LED,Normally White
Touch Panel No touch

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage For Analog VCC 2.4 3.3 3.6 V
Supply Current For LCM ICC － 6.7 10.0 mA
Specifiche di prodotto
Brand Winstar
Size 2.8"
Risoluzione 240x320
Area Attiva (mm) 43.20x57.60
Colore Full Color
Interfaccia Display MCU (SPI)
Display IC ST7789V
Angolo Visione TN
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 20
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 2.8"
Risoluzione 240x320
Area Attiva (mm) 43.20x57.60
Colore Full Color
Interfaccia Display MCU (SPI)
Display IC ST7789V
Angolo Visione TN
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 20
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di CNE5231XXXXXXXXXXX00

CNE5231XXXXXXXXXXX00

ZIF Connector 20 pins, 0.5mm pitch, Top contact
Da €2,40 IVA esclusa
Immagine di MOLEX_505278-2033

MOLEX_505278-2033

ZIF Connector 20 pins, 0.5mm pitch, Bottom contact
Da €1,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Prodotti in Vetrina
Copyright © 2023 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
;