Menu
Cerca
Filters
Close
Menu

WF40-480480ED#0SPW0-FC

Immagine di WF40-480480ED#0SPW0-FC Immagine di WF40-480480ED#0SPW0-FC
TFT 4'' 480x480, Square, LCD Module, Interface RGB, High Brightness 1000cd/m², Wide View Angle (IPS), Super extended temperature, No touch

DESCRIPTION

High Brightness 4 inch Square IPS TFT-LCD module; made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 1000 nits (typical value), glare surface panel, aspect Ratio 1:1.This model is also available in projected capacitive touch panel (PCAP) and resistive touch panel option .

It is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. Operating temperature from -30℃ to +80℃; storage temperature from -30℃ to +80℃.

 

DRAWING

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 4.77 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA


SKU: WF40-480480ED#0SPW0-FC
Brand: Winstar
Disponibile: No
Si tratta dela prima recensione per questo prodotto
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€23,70
€19,00
€17,40

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€23,70 IVA esclusa

DESCRIPTION

High Brightness 4 inch Square IPS TFT-LCD module; made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 1000 nits (typical value), glare surface panel, aspect Ratio 1:1.This model is also available in projected capacitive touch panel (PCAP) and resistive touch panel option .

It is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. Operating temperature from -30℃ to +80℃; storage temperature from -30℃ to +80℃.

 

DRAWING

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 4.77 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA


Specifiche di prodotto
Brand Winstar
Size 4"
Risoluzione 480x480
Area Attiva (mm) 71.85x70.17
Colore Full Color
Interfaccia Display RGB
Display IC No
Angolo Visione IPS
Brightness Range High 601~1200cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -30~80
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 4"
Risoluzione 480x480
Area Attiva (mm) 71.85x70.17
Colore Full Color
Interfaccia Display RGB
Display IC No
Angolo Visione IPS
Brightness Range High 601~1200cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -30~80
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di CNR5231XXXXXXXXXXX01

CNR5231XXXXXXXXXXX01

ZIF Connector 40 pins, 0.5mm pitch, Top contact
Da €1,90 IVA esclusa
Immagine di CNR6231XXXXXXXXXXX00

CNR6231XXXXXXXXXXX00

ZIF Connector 40 pins, 0.5mm pitch, Bottom contact
Da €1,90 IVA esclusa
Immagine di TST0004R0E1241XXXX00

TST0004R0E1241XXXX00

Resistive Touch panel 4'', O.D. 78.40x82.55mm, 4w, Soldering FP (suitable for E family)
Da €6,10 IVA esclusa
Immagine di TST0004R0E4211XXXX00

TST0004R0E4211XXXX00

Capacitive (GG) Touch panel 4'', O.D. 78.40x82.60mm, I2C interface (ST1633 IC), FPC per ZIF Connector (suitable for E family)
Da €15,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2021 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;