Cerca
Italiano
Catalogo
    Menu Chiudi
    TFT 4.3" 480x272, LCD + IC Controller, Interface MCU (Parallel) IC SSD1963 (8/16bit), 400cd/m², Frame, Capacitive touch panel I2C interface (GG, FT5426 IC)
    Brand: Winstar
    Cod.: WF43-480272QD#D07-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €56,00
    €50,40
    €47,40

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €56,00 IVA esclusa
    i h

    RECOMMENDED ONLY AS SPARE PARTS

    For new projects please contact us at [email protected].

     

    DESCRIPTION

    4.3 inch Winstar TFT Q Series modules with capacitive touch panel.  The Q series modules provide the following innovative advantages to offer outstanding performance for colorful displays:
    • Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
    • Q Series modules are available in 8 bit and 16 bit parallel interface options.
    • The pin no. 33 ~ 36 already pre-defined as backlight supply.
    • Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
    • The 5.7", 7.0", 8.0" and 10.2" Q Series are allowed to design "Sleep Mode" to close BIAS(VGH, VGL, AVDD) low power consumption mode.
    • Projected Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.

     

    DRAWING

    INTERFACE

     

    PinSymbolFunction
    1 GND System round pin of the IC. Connect to system ground.
    2 VDD Power Supply : +3.3V
    3 BL_E Backlight control signal , H: On \ L: Off
    4 D/C Data/Command select
    5 WR Write strobe signal
    6 RD Read strobe signal
    7~14 D0~D7 Data bus
    15~22 D8~D15 Data bus (When select 8bits mode, this pin is NC)
    23 NC No connection
    24 CTP_INT External interrupt to the host
    25 CS Chip select
    26 RESET Hardware reset
    27 DIP ON Display control H: On \ L:Off
    28 NC No connection
    29 CTP_SCL Active low I2C clock input
    30 CTP_SDA Data input I2C data input and output
    31 CTP_RST External Reset, Low is active
    32 NC No connection
    33~34 VLED- VLED- for B/L LED inverter (GND)
    35~36 VLED+ VLED+ for B/L LED inverter (+3.3V)
    Specifiche di prodotto
    Size 4.3"
    Resolution 480x272
    Active Area (mm) 95.04x53.85
    Color Full Color
    Display Interface MCU (Parallel)
    Display IC SSD1963
    View Angle TN
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection ZIF Connector
    Pin Nr. 36
    Pin Pitch 0.5mm
    Touch Panel IC Controller FT5426
    Preferred - Not Preferred Not Preferred
    You are running a Trial version of Nop Attachments
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni