Cerca
Filters
Close

WF43-480272QD#DF4-FC

TFT 4.3'' 480x272, LCD + IC Controller, Interface MCU IC SSD1963 (8/16bit), Wide view angle (O-Film), Frame, No touch

DESCRIPTION

 

The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:

  • Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
  • Q Series modules are available in 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already pre-defined as backlight supply.
  • Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
  • The 5.7”, 7.0”, 8.0” and 10.2” Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
  • Resistive Touch Screen options are available for all Q Series display, and 4-Line signal (X1, Y1, X2, Y2) can be input from 36pin connector.
  • Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.

 

DRAWING

4.3" SSD1963 TFT LCD Panel with Controller Board, 4.3 TFT LCD Screen with Controller Board - WF43QTIBEDBND - Winstar

INTERFACE

 

PinSymbolFunction
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connection
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 NC No connection
30 NC No connection
31 NC No connection
32 YD Bottom electrode
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+3.3V)
SKU: WF43-480272QD#DF4-FC
Brand: Winstar
Disponibile: No
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
50+
100+
300+
500+
Prezzo
€42,00
€35,00
€31,70
€29,20
€27,40
€25,00
€24,30

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€42,00 IVA esclusa

DESCRIPTION

 

The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:

  • Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
  • Q Series modules are available in 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already pre-defined as backlight supply.
  • Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
  • The 5.7”, 7.0”, 8.0” and 10.2” Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
  • Resistive Touch Screen options are available for all Q Series display, and 4-Line signal (X1, Y1, X2, Y2) can be input from 36pin connector.
  • Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.

 

DRAWING

4.3" SSD1963 TFT LCD Panel with Controller Board, 4.3 TFT LCD Screen with Controller Board - WF43QTIBEDBND - Winstar

INTERFACE

 

PinSymbolFunction
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connection
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 NC No connection
30 NC No connection
31 NC No connection
32 YD Bottom electrode
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+3.3V)
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Interfaccia MCU
Controllore a Bordo SSD1963
Angolo Visione O-Film
Luminosità (cd/m²) 400
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 36
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Interfaccia MCU
Controllore a Bordo SSD1963
Angolo Visione O-Film
Luminosità (cd/m²) 400
Frame Yes
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 36
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
;