IPS 4.3 inch High Brightness TFT-LCD module with Capacitive Touch Panel; made of resolution 480x272 pixels. It comes with a control board which only supports Raspberry PI system HDMI Signal interface (only DVI), please note this module do not build in EDID parameter to support PC HDMI Signal. There is a 40-pin GPIO connector on the board which it is designed to make Raspberry Pi usage become easily. The control board on module is featured with four mounting holes which is an easy method for customers to fix modules on their applications. This HDMI series also supports PWM (Pulse Width Modulation) function for adjusting LED backlight brightness. It adopt IPS panel which has a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The brightness is 800 nits (typical value); Capacitive Touch Panel is built in with ILI2130 IC which supports USB interface. We also offer Resistive Touch Panels (RTP) optional.
The supply voltage for LCM (VDD) is 5V, glare surface glass, aspect ratio 16:9, and contrast ratio 800:1 (typical value). Operating temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.
Note1: The 3.3V supply current is limited; please pay special attention to useNote2:PWM dimming frequency is about 100Hz
I: input, O: output, P: Power
Per quantita’ maggiori di 25pz prego invii la richiesta a firstname.lastname@example.org o chiami il +39 0332 1888005