Cerca
Filters
Close

WF57-320240SD#BS3-FC

TFT 5.7'' 320x240, Monochrome, LCD + IC Controller, Interface MCU (Parallel) IC ST7511, High Brightness 800cd/m², Frame, Capacitive touch panel I2C interface (GG, ILI2130 IC)

DESCRIPTION

New TFT+CTP Ilitek IC ILI2130 version // Previous TFT+CTP Focaltech IC FT5426 version P/N WF57-320240SD#AS3-FC

Graphic LCD display with a diagonal of 5.7 " and a resolution of 320 x 240 QVGA mono TFT Display. The external dimensions of the display is 160 x 109 x 8.74 mm (COG construction), and the active area is 115.2 x 86.4 mm. What is important, it is a monochrome model with TN positive LCD, but applied in the active matrix TFT, which allows for high contrast (800:1), high brightness 800 cd/m2 and short response times. In short, the mono TFT display performance is much better on contrast, brightness and response time than traditional monochrome LCD module.

This display does not need an extended controller board to drive MCU control. The display can operate in mode 2, 4 or 16 shades of gray scale, depending on the settings. Because the display driver supports several communication modes : 3 - or 4-line serial interface and an 8 -bit parallel interface compatible with standard systems with 8080 or 6800 family, the desired mode is selected by user to choose appropriate interface to control the device system. It is also worth mentioning the possibility of introducing the device in sleep mode, which does not clear the memory contents of the display.

 

 

DRAWING

 

 

 

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 A0 Data/Command select
5 /WR(R/W) Write strobe signal
6 /RD(E) Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 /CS Chip select
16 /RESET(RSTB) Hardware reset
17 IF0 Mode select
18 IF1
19 NC No connect
20 NC No connect
21 NC No connect
22 NC No connect
 

 

Backlight Unit Section(CN2)

Pin No.SymbolI/OFunctionRemark
1 VLED+ P Power for LED backlight anode (A) Red
3 VLED- P Power for LED backlight cathode (K) White
 

 

PCAP PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock inputI2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

 

General Specifications

ItemDimensionUnit
Size 5.7 inch
Dot Matrix 320 × 240 dots
Module dimension 160.0 × 109.0 × 8.74 mm
Active area 115.2 × 86.4 mm
Dot pitch 0.36 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Interface MCU / SPI
Gray Scale 16 Gray scale (4BPP)/ 4 Gray scale (2BPP)/ 2 Gray scale (1BPP)
Driver IC ST7511U or Equivalent
Backlight Type LED, Normally White
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP Resolution 16384*16384
PCAP FW Version 0x07.0x00.0x00.0x00.0xA1.0x01.0x57.0x00
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD 20 30 mA
Power Consumption 66 108 mW
Supply Voltage For Touch VDDT 3.0 3.3 3.6 V
ICTP 56 84 mA


 

 

SKU: WF57-320240SD#BS3-FC
Brand: Winstar
Disponibile: No
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€97,70
€86,30
€73,60

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€97,70 IVA esclusa

DESCRIPTION

New TFT+CTP Ilitek IC ILI2130 version // Previous TFT+CTP Focaltech IC FT5426 version P/N WF57-320240SD#AS3-FC

Graphic LCD display with a diagonal of 5.7 " and a resolution of 320 x 240 QVGA mono TFT Display. The external dimensions of the display is 160 x 109 x 8.74 mm (COG construction), and the active area is 115.2 x 86.4 mm. What is important, it is a monochrome model with TN positive LCD, but applied in the active matrix TFT, which allows for high contrast (800:1), high brightness 800 cd/m2 and short response times. In short, the mono TFT display performance is much better on contrast, brightness and response time than traditional monochrome LCD module.

This display does not need an extended controller board to drive MCU control. The display can operate in mode 2, 4 or 16 shades of gray scale, depending on the settings. Because the display driver supports several communication modes : 3 - or 4-line serial interface and an 8 -bit parallel interface compatible with standard systems with 8080 or 6800 family, the desired mode is selected by user to choose appropriate interface to control the device system. It is also worth mentioning the possibility of introducing the device in sleep mode, which does not clear the memory contents of the display.

 

 

DRAWING

 

 

 

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 A0 Data/Command select
5 /WR(R/W) Write strobe signal
6 /RD(E) Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 /CS Chip select
16 /RESET(RSTB) Hardware reset
17 IF0 Mode select
18 IF1
19 NC No connect
20 NC No connect
21 NC No connect
22 NC No connect
 

 

Backlight Unit Section(CN2)

Pin No.SymbolI/OFunctionRemark
1 VLED+ P Power for LED backlight anode (A) Red
3 VLED- P Power for LED backlight cathode (K) White
 

 

PCAP PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock inputI2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

 

General Specifications

ItemDimensionUnit
Size 5.7 inch
Dot Matrix 320 × 240 dots
Module dimension 160.0 × 109.0 × 8.74 mm
Active area 115.2 × 86.4 mm
Dot pitch 0.36 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Interface MCU / SPI
Gray Scale 16 Gray scale (4BPP)/ 4 Gray scale (2BPP)/ 2 Gray scale (1BPP)
Driver IC ST7511U or Equivalent
Backlight Type LED, Normally White
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP Resolution 16384*16384
PCAP FW Version 0x07.0x00.0x00.0x00.0xA1.0x01.0x57.0x00
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD 20 30 mA
Power Consumption 66 108 mW
Supply Voltage For Touch VDDT 3.0 3.3 3.6 V
ICTP 56 84 mA


 

 

Specifiche di prodotto
Brand Winstar
Size 5.7"
Risoluzione 320x240
Area Attiva (mm) 115.20x86.40
Colore Monochrome
Interfaccia Display MCU (Parallel)
Display IC ST7511
Angolo Visione TN
Sunlight Readable High 601~1200cd/m²
Frame Yes
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 22
Passo Pin 1mm
IC Controller Touch Panel ILI2130
Preferred - Not Preferred Not Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 5.7"
Risoluzione 320x240
Area Attiva (mm) 115.20x86.40
Colore Monochrome
Interfaccia Display MCU (Parallel)
Display IC ST7511
Angolo Visione TN
Sunlight Readable High 601~1200cd/m²
Frame Yes
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 22
Passo Pin 1mm
IC Controller Touch Panel ILI2130
Preferred - Not Preferred Not Preferred
Ultimi prodotti visti
;