Cerca
Italiano
Catalogo
    Menu Chiudi

    WO12864-86ID3#000-FC

    Graphic LCD 2.9" 128x64, B/L white, FSTN black neg, Transmissive, COG, 3.3V, Interface 6800/8080/SPI, 6 O'clock (IC ST7565P)
    Brand: Winstar
    Cod.: WO12864-86ID3#000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €17,30
    €15,60
    €14,60
    €14,30

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €17,30 IVA esclusa
    i h

    MOQ

    After sample PO, MP MOQ 1750pcs

     

    DRAWING

    Winstar WO12864D3 - 128x64 COG Displays (Chip on Glass Display)

    SPECIFICATIONS

     

    Interface Pin Function

    Pin No.SymbolDescription
    1 /CS1 The chip select signal
    2 /RES Controller reset signal, Active Low
    3 A0 Data/ Instruction select signal
    4 /WR(R/W) 8080 family: Write signal, 6800 family: Read/Write signal
    5 /RD(E) 8080 family: Read signal, 6800 family: Enable clock
    6~13 D0~D7 Data bus line
    14 VDD Power supply for logic
    15 VSS Ground
    16 Vout Positive Voltage output
    17 CAP5+ DC/DC voltage converter
    18 CAP3+ DC/DC voltage converter.
    19 CAP1- DC/DC voltage converter.
    20 CAP1+ #N/A
    21 CAP2+ DC/DC voltage converter.
    22 CAP2- DC/DC voltage converter.
    23 CAP4+ DC/DC voltage converter.
    24 VRS This is the internal-output VREG power supply for the LCD power supply voltage regulator.
    25~29 V4~V0 Bias voltage levels for LCD driving
    30 VR LCD Contrast Adjustment when IRS = “L”
    31 C86 Interface selection 6800/8080
    32 P/S Selects the interface type: Serial or Parallel.
    33 /HPM Control power supply for LCD “H”: Normal mode, “L”: High power mode
    34 IRS Selects the resistors for the V0 voltage level adjustment

     

    Mechanical Data

    ItemStandard ValueUnit
    Module Dimension 80.0 × 54.0 mm
    Viewing Area 70.7 × 38.8 mm
    Dot Pitch 0.52 × 0.52 mm
    Dot Size 0.48 × 0.48 mm

     

    Electrical Characteristics

    ItemSymbolStandard value
    typ.
    Unit
    Input Voltage VDD 3.0 V
    Recommended LCD Driving
    Voltage for Normal Temp.
    Version module @25°C
    Vo-Vss 10.0 V


    Specifiche di prodotto
    Size 2.9"
    Resolution 128x64
    Active Area (mm) 66.52x33.24
    Dot Size 0.48x0.48
    B/L color, LCD type B/L white, FSTN black neg
    Power supply 3.3V
    Display Interface 6800/8080/SPI
    Display IC ST7565P
    Constructive Structure COG
    View Angle 6H
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 34
    Pin Pitch 0.5mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni