Since the COVID-19 pandemic began in 2020, COVID-19 has changed the supply chain balance, resulting in insufficient IC capacity in the display market. The supply of SSD1309 has become unstable, and lead times are getting longer. To guarantee on-time delivery to customers, we develop a new series using CH1116 to replace SSD1309....
Backlight Module (BLM), also known as backlight panel, is one of the essential components of Monochrome LCD displays. Since the liquid crystal display is not self-illuminating, the light source must be provided through the backlight module, penetrating the liquid crystal panel in sequence. Finally, it enters the human eye to form an image to achieve the display function...
Winstar has come up with a new design concept: combining a driving module circuit board (PCB) and STN-LCD display as a 2-in-1 structure. The touch button is designed within the viewing area (VA) of LCD to increase the touch sensibility...
Smartphones change people's habits and make people enjoy the convenience of touch solutions. Winstar's vision is to devote itself to the human-machine interaction interface and communication technology innovation. Touch panels can be divided into resistive touch panels (RTP) and capacitive touch panels (CTP) based on electrical principles...
HDMI Series is plug and play device. There are two IC transfers display and touch signal to master device. For touch panel, there are Mouse Mode (default) and Touch Pad Mode. And capacitive touch panel can update the firmware through USB port. It can work with Windows and Raspbian operating system...
Comparison table between MCU TFTs with Solomon IC SSD1963 vs RAiO IC RA8875. Power supply / MCU interface / Graphics / BTE / Double layer / Character fonts / Keyboard / Touch management / DMA...
Buttons in the past, touch panels today; in the past CRT, and LCD today are bright and dazzling self-emitting OLED, no electronic radiation, no backlight; a green and environmentally friendly communication technology - TP OLED...
This article declares how to use a SmartDisplay CANBUS 4.3" module in displaying 240-degree Gauge received from a host controller. The host is Arduino mega 2560 board with CANBUS shield and Rotary Angle Sensor. Required components are shown below:
1.SmartDisplay CANBUS 4.3"
2.ARDUINO Mega 2560
3.CAN-Bus Shield
4.Rotary Angle Sensor
5.CANBus Dongle
6.Software GUI-Builder...
EOL Notice: Solomon ICs SSD1307ZD & SSD1311 Phase Out. OLED families involved: WEO012832G series / WEA012832G series (1.71”) / WEO001602C series / WEP001602C series (2.26”) /WEO001602G serie (2.26”) / WEO002002A series / WEP002002A series (2.93”) / WEO002004C serie / WEA002004C series / WEP002004C series (2.89”)...