Search
Filters
Close

NT043-C002WS

TFT 4.3'' 480x272, LCD + IC Controller, Interface MCU (Parallel) IC SSD1963 (8/16bit), 400cd/m², Frame, Capacitive touch panel I2C interface (GG, ILI2130 IC)

 

DESCRIPTION

 

The NT043-C002WS display is a 4.3'' Next Vision Display TFT module with Capacitive Touch Panel.  

This module provides the following innovative advantages to offer outstanding performance for colorful displays:

  • It integrates a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
  • It is available in 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already pre-defined as backlight supply.
  • Built in backlight driver IC, this TFT display can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.

 

DRAWING

 

SPECIFICATIONS

Interface

Lcm Pin Definition

PinSymbolFunction
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 D0~D7 Data bus
15~22 D8~D15 Data bus (When select 8bits mode, this pin is NC)
23 NC No connection
24 CTP_INT External interrupt to the host
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 CTP_SCL Active low I2C clock input
30 CTP_SDA Data input I2C data input and output
31 CTP_RST External Reset, Low is active
32 NC No connection
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+3.3V)

 

General Specifications

ItemDimensionUnit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 106.7 × 83.98 × 8.6 mm
Active area 95.04 × 53.856 mm
Dot pitch 0.066 × 0.198 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC SSD1963
TFT Interface Digital 8080 family MPU 8bit/16bit
PCAP FW Version 0x07.0x00.0x00.0x00.0x01.0x0C.0x11.0x43
PCAP IC ILI2130 or equivalent
PCAP Resolution 16384*16384
PCAP Interface I2C
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 210 350 mA
SKU: NT043-C002WS
Available: No
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
Price
€66.40
€58.70
€50.30

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€66.40 excl tax

 

DESCRIPTION

 

The NT043-C002WS display is a 4.3'' Next Vision Display TFT module with Capacitive Touch Panel.  

This module provides the following innovative advantages to offer outstanding performance for colorful displays:

  • It integrates a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
  • It is available in 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already pre-defined as backlight supply.
  • Built in backlight driver IC, this TFT display can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.

 

DRAWING

 

SPECIFICATIONS

Interface

Lcm Pin Definition

PinSymbolFunction
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 D0~D7 Data bus
15~22 D8~D15 Data bus (When select 8bits mode, this pin is NC)
23 NC No connection
24 CTP_INT External interrupt to the host
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 CTP_SCL Active low I2C clock input
30 CTP_SDA Data input I2C data input and output
31 CTP_RST External Reset, Low is active
32 NC No connection
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+3.3V)

 

General Specifications

ItemDimensionUnit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 106.7 × 83.98 × 8.6 mm
Active area 95.04 × 53.856 mm
Dot pitch 0.066 × 0.198 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC SSD1963
TFT Interface Digital 8080 family MPU 8bit/16bit
PCAP FW Version 0x07.0x00.0x00.0x00.0x01.0x0C.0x11.0x43
PCAP IC ILI2130 or equivalent
PCAP Resolution 16384*16384
PCAP Interface I2C
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 210 350 mA
Products specifications
Brand Next Vision Display
Size 4.3"
Resolution 480x272
Active Area (mm) 95.04x53.85
Color Full Color
Display Interface MCU (Parallel)
Display IC SSD1963
View Angle TN
Frame Yes
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection ZIF Connector
Pin Nr. 36
Pin Pitch 0.5mm
Touch Panel IC Controller ILI2130
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Next Vision Display
Size 4.3"
Resolution 480x272
Active Area (mm) 95.04x53.85
Color Full Color
Display Interface MCU (Parallel)
Display IC SSD1963
View Angle TN
Frame Yes
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection ZIF Connector
Pin Nr. 36
Pin Pitch 0.5mm
Touch Panel IC Controller ILI2130
Preferred - Not Preferred Preferred
Recently viewed
;