DESCRIPTION
4.3 inch TFT LCD Display which is Winstar extended model with SSD1963 controller board plus a 36 pin-out connector on board. The model is available in 8080 family MPU 8 bit or 16 bit interface option and pre-defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This 4.3" TFT LCD panel is feature with Glare coating surface panel having benefited of less-reflective.
This serie has Solomon SSD1963 IC which has the traditional inputs and drive TFT by VESA signal. Therefore, there is no need of T-COM circuit on board. Besides, we have integrated all functions including TFT connection, backlight driver, and touch panel into only one connection.
DRAWING

SPECIFICATIONS
Interface
| Pin | Symbol | Function |
| 1 |
GND |
System round pin of the IC. Connect to system ground. |
| 2 |
VDD |
Power Supply : +3.3V |
| 3 |
BL_E |
Backlight control signal , H: On \ L: Off |
| 4 |
D/C |
Data/Command select |
| 5 |
WR |
Write strobe signal |
| 6 |
RD |
Read strobe signal |
| 7 |
DB0 |
Data bus |
| 8 |
DB1 |
Data bus |
| 9 |
DB2 |
Data bus |
| 10 |
DB3 |
Data bus |
| 11 |
DB4 |
Data bus |
| 12 |
DB5 |
Data bus |
| 13 |
DB6 |
Data bus |
| 14 |
DB7 |
Data bus |
| 15 |
DB8 |
Data bus (When select 8bits mode, this pin is NC) |
| 16 |
DB9 |
Data bus (When select 8bits mode, this pin is NC) |
| 17 |
DB10 |
Data bus (When select 8bits mode, this pin is NC) |
| 18 |
DB11 |
Data bus (When select 8bits mode, this pin is NC) |
| 19 |
DB12 |
Data bus (When select 8bits mode, this pin is NC) |
| 20 |
DB13 |
Data bus (When select 8bits mode, this pin is NC) |
| 21 |
DB14 |
Data bus (When select 8bits mode, this pin is NC) |
| 22 |
DB15 |
Data bus (When select 8bits mode, this pin is NC) |
| 23 |
NC |
No connection |
| 24 |
NC |
No connection |
| 25 |
CS |
Chip select |
| 26 |
RESET |
Hardware reset |
| 27 |
DIP ON |
Display control H: On \ L:Off |
| 28 |
NC |
No connection |
| 29 |
NC |
No connection |
| 30 |
NC |
No connection |
| 31 |
NC |
No connection |
| 32 |
NC |
No connection |
| 33 |
VLED- |
VLED- for B/L LED inverter (GND) |
| 34 |
VLED- |
VLED- for B/L LED inverter (GND) |
| 35 |
VLED+ |
VLED+ for B/L LED inverter (+3.3V) |
| 36 |
VLED+ |
VLED+ for B/L LED inverter (+3.3V) |
General Specifications
| Item | Dimension | Unit |
| Size |
4.3 |
inch |
| Dot Matrix |
480 x RGB x 272(TFT) |
dots |
| Module dimension |
106.7 x 69.6 x 6.95 |
mm |
| Active area |
95.04 x 53.856 |
mm |
| Dot pitch |
0.066 x 0.198 |
mm |
| LCD type |
TFT, Normally White, Transmissive |
| View Direction |
12 o'clock |
| Gray Scale Inversion Direction |
6 o'clock |
| Aspect Ratio |
16:9 |
| Backlight Type |
LED, Normally White |
| Controller IC |
SSD1963 |
| Interface |
Digital 8080 family MPU 8bit/16bit |
| Touch Panel |
Without Touch Panel |
| Surface |
Glare |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
| Operating Temperature |
TOP |
-20 |
- |
+70 |
℃ |
| Storage Temperature |
TST |
-30 |
- |
+80 |
℃ |
Electrical Characteristics
Operating conditions: (CON3.Pin1=GND, Pin2=VDD)
| Item | Symbol | Condition | Min | Typ | Max | Unit |
| Supply Voltage For LCM |
VDD |
- |
3.0 |
3.1 |
3.3 |
V |
| Supply Current For LCM |
IDD |
- |
- |
200 |
300 |
mA |
Products specifications
|
Brand
|
Winstar |
|
Size
|
4.3" |
|
Resolution
|
480x272 |
|
Active Area (mm)
|
95.04x53.85 |
|
Color
|
Full Color |
|
Display Interface
|
MCU (Parallel) |
|
Display IC
|
SSD1963 |
|
View Angle
|
TN |
|
Frame
|
No |
|
Touch Panel
|
No touch |
|
O. Temperature (°C)
|
-20~70 |
|
Data Connection
|
ZIF Connector |
|
Pin Nr.
|
36 |
|
Pin Pitch
|
0.5mm |
|
Preferred - Not Preferred
|
Preferred |