Cerca
Italiano
Catalogo
    Menu Chiudi

    WAA0420BB5#A2N1AA-FC

    E-paper 4.2" 400x300, Color Black on White, Interface SPI, with Front Light
    Brand: Winstar
    Cod.: WAA0420BB5#A2N1AA-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    Prezzo
    €47,30
    €42,60

    Per quantità maggiori di 9pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €47,30 IVA esclusa
    i h

    DESCRIPTION

    The WAA0420BB5#A2N1AA-FC is a 4.2 inch E-paper display module designed for low-power applications such as Electronic Shelf Label (ESL) systems. Featuring a built-in front-light panel, this 4.2" E-paper display offers excellent readability under various lighting conditions while maintaining ultra-low power consumption.

    This 4.2 inch E-paper Module supports 1-bit black and white image rendering with a resolution of 400x300 pixels across its active display area. Built on a TFT-array driven electrophoretic technology, the module integrates key components such as a gate driver, source driver, timing controller, oscillator, and more—streamlining system integration and reducing external circuitry requirements.

    Key Features:

    • 400x300 pixel resolution
    • High contrast and high reflectance for crisp visibility
    • Ultra-wide viewing angle
    • Pure reflective, bi-stable display with ultra-low power consumption
    • Supports both landscape and portrait orientations
    • Commercial temperature range compatibility
    • Hard-coat, anti-glare display surface
    • Deep sleep mode with ultra-low current draw
    • On-chip display RAM and built-in waveform storage (OTP or MCU controlled)
    • SPI interface and on-chip oscillator for simplified communication
    • Integrated booster, regulator, and VCOM generation circuits
    • I²C master interface for external temperature sensor reading
    • Supports partial update mode
    • Built-in temperature sensor for enhanced performance across environments

    With its integrated features and flexible interface, this 4.2 inch E paper display module is ideal for modern, battery-powered applications where readability, energy efficiency, and space-saving integration are essential.

     

    DRAWING

    SPECIFICATIONS

    General Specifications

    ParameterSpecificationsUnit
    Screen Size 4.2 Inch
    Display Resolution 400(H)×300(V) Pixel
    Active Area 84.8(H)×63.6(V) mm
    Pixel Pitch 0.212×0.212 mm
    Pixel Configuration Rectangle  
    Outline Dimension 91(H) × 77 (V) × 2.02(D) mm
    Module Weight 16.1±0.3 g

     

    Electrical Characteristics

    Absolute Maximum Ratings

    ParameterSymbolRatingUnit
    Logic supply voltage VCI -0.5 to +6.0 V
    Logic Input voltage VIN -0.5 to VCI +0.5 V
    Logic Output voltage VOUT -0.5 to VCI +0.5 V
    Operating Temp range TOPR 0 to +50 ºC
    Storage Temp range TSTG -25 to+70 ºC
    Optimal Storage Temp TSTGo 23±2 ºC
    Optimal Storage Humidity HSTGo 55±10 %RH

     

    Input /Output Pin Assignment

    No.NameI/ODescription
    1 NC   Do not connect with other NC pins
    2 GDR O N-Channel MOSFET Gate Drive Control
    3 RESE I Current sense input for control loop.
    4 NC NC Do not connect with other NC pins
    5 VSH2 C Positive source driving voltage (Red)
    6 TSCL O I2C interface to digital temperature sensor Clock pin
    7 TSDA I/O I2C interface to digital temperature sensor Data pin
    8 BS1 I Bus Inteface selection pin
    9 BUSY O Busy state output pin
    10 RES# I Reset signal input. Active Low
    11 D/C# I Data / Command control pin
    12 CS# I Chip select input pin
    13 SCL I Serial Clock pin (SPI)
    14 SDA I/O Serial Data pin (SPI)
    15 VDDIO P Power Suupply for interface logic pins. It should be connected with VCI
    16 VCI P Power Supply for the chip
    17 VSS P Ground
    18 VDD C Core logic power pin VDD can be regulated internally from VCI. A capacitor should be connected between VDD and VSS
    19 VPP P FOR TEST
    20 VSH1 C Positive Source driving voltage
    21 VGH C Power Supply pin for Positive Gate driving voltage and VSH1
    22 VSL C Negative Source driving voltage
    23 VGL C Power Supply pin for Negative Gate driving voltage VCOM and VSL
    24 VCOM C VCOM driving voltage

    Note: I: Input, O: Output, P: Power, D: Dummy, S: Shorted line, M: Mark, PI: Power input, PO: Power output, I/O: Input / Output, PS: Power Setting, C: Capacitor pin.

    Specifiche di prodotto
    Size 4.2"
    Resolution 400x300
    Active Area (mm) 84.80x63.60
    Dot Size 0.21x0.21
    Color Black on White
    Display Interface SPI
    O. Temperature (°C) 0~50
    Data Connection FPC for ZIF Connector
    Pin Nr. 24
    Pin Pitch 0.5mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni