Cerca
Filters
Close

WEA12864B#D00-FC

PMOLED 0.96'' Graphic 128x64, Blue, COG + PCB, 3V, Interface I2C (8 Pin)

DESCRIPTION

 

Winstar OLED 12864, SSD1306 OLED Display

OLED display module made of 128x64 pixels, diagonal size 0.96 inch. This module is built in with SSD1306 IC, it supports I2C (default), SPI interface optional, VCC 3V /5V, I/O level 5V to 3V, with conversion circuit, 1/64 duty cycle. PCB outline size 38.0x28.5x2.37 mm with mounting holes on board and 8 metal pins on module.

This 128x64 SSD1306 OLED display module is suitable for smart control, industrial control for heater, smart home application, medical device, etc. Operating temperatures from -40℃ to +80℃; torage temperatures range from -40℃ to +85℃.

 

DRAWING

OLED 12864, 12864 OLED, OLED Display Module 12864, SSD1306 OLED, SSD1306 OLED Display, OLED 128x64 SSD1306

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 64 Dots
Module dimension 38.00 × 28.50 × 2.37 mm
Active Area 21.74 × 10.86 mm
Pixel Size 0.148 × 0.148 mm
Pixel Pitch 0.17 × 0.17 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Interface I2C, SPI
Size 0.96 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 1.65 3.3 V
Supply Voltage for Logic VIN 4.0 6.0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic(3V) VDD 2.8 3.0 3.2 V
Supply Voltage for Logic(5V) VIN 4.8 5.0 5.2 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 12.0 22.0 mA
SKU: WEA12864B#D00-FC
Brand: Winstar
Disponibile: No
Prezzi per quantità
Quantità
1+
5+
10+
25+
Prezzo
€6,30
€4,60
€4,50
€4,40

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€6,30 IVA esclusa

DESCRIPTION

 

Winstar OLED 12864, SSD1306 OLED Display

OLED display module made of 128x64 pixels, diagonal size 0.96 inch. This module is built in with SSD1306 IC, it supports I2C (default), SPI interface optional, VCC 3V /5V, I/O level 5V to 3V, with conversion circuit, 1/64 duty cycle. PCB outline size 38.0x28.5x2.37 mm with mounting holes on board and 8 metal pins on module.

This 128x64 SSD1306 OLED display module is suitable for smart control, industrial control for heater, smart home application, medical device, etc. Operating temperatures from -40℃ to +80℃; torage temperatures range from -40℃ to +85℃.

 

DRAWING

OLED 12864, 12864 OLED, OLED Display Module 12864, SSD1306 OLED, SSD1306 OLED Display, OLED 128x64 SSD1306

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 64 Dots
Module dimension 38.00 × 28.50 × 2.37 mm
Active Area 21.74 × 10.86 mm
Pixel Size 0.148 × 0.148 mm
Pixel Pitch 0.17 × 0.17 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Interface I2C, SPI
Size 0.96 inch

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VDD 1.65 3.3 V
Supply Voltage for Logic VIN 4.0 6.0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

 

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic(3V) VDD 2.8 3.0 3.2 V
Supply Voltage for Logic(5V) VIN 4.8 5.0 5.2 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 12.0 22.0 mA
Specifiche di prodotto
Brand Winstar
Size 0.96"
Risoluzione 128x64
Area Attiva (mm) 21.74x10.86
Dot Size 0.14x0.14
Polarizzatore Glare
Colore Blue
Alimentazione 3V
Interfaccia I2C (option SPI)
Controllore a Bordo SSD1306BZ
Struttura COG + PCB
Frame Yes
Touch Panel No touch
Connessione Display Pin
Nr. Pin 8
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 0.96"
Risoluzione 128x64
Area Attiva (mm) 21.74x10.86
Dot Size 0.14x0.14
Polarizzatore Glare
Colore Blue
Alimentazione 3V
Interfaccia I2C (option SPI)
Controllore a Bordo SSD1306BZ
Struttura COG + PCB
Frame Yes
Touch Panel No touch
Connessione Display Pin
Nr. Pin 8
Passo Pin 2.54mm
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;