Menu
Cerca
Filters
Close
Menu

WF18-128160FD#0F0-FC

Immagine di WF18-128160FD#0F0-FC Immagine di WF18-128160FD#0F0-FC
TFT 1.77'' 128x160, Portrait, LCD + IC Controller, Interface MCU (Parallel/SPI) IC ST7735S, 400cd/m², Wide View Angle (O-Film), No touch

DESCRIPTION

 

Full color 128x160 TFT-LCD display module, diagonal size 1.77 inch. This module is built in with ST7735S IC; it supports 8080 8/16-bit parallel and serial 3-wire SPI interface. Module dimension of 34.0 x 45.83 mm and Active area size of 28.03 x 35.04 mm; it's supply voltage range from for analog is 2.5V to 4.8V.

It is a portrait mode LCD module, if you would like to use it as landscape mode, please contact us for more technical support. This 1.77” TFT LCD module is featured with brightness up to 500 cd/m2(typical value). Operating temperatures from -20℃ to 70℃; storage temperatures from -30℃ to 80℃.

 

DRAWING

1.77 inch 128x160 TFT ST7735 IC Display - WF18FTLAADNN0 - Winstar

INTERFACE

 

PinSymbolI/OFunction
1 VLED- P Back light cathode
2 VLED P Back light anode
3 IM0 I - MCU Parallel Interface Type Selection
-If Not Used, Please Fix this Pin at VDDI or DGND Level. 
4 IM1
5 IM2 I MCU Parallel Interface Bus and Serial Interface select
IM2='1', Parallel Interface
IM2='0', Serial Interface
6 RESET P Reset signal
7-12 NC - No Connect
13-28 DB15-DB0(SPI_SDA) I/O DB15:0] are used as MCU parallel interface data bus.
-DBis the serial input/output signal in serial interface mode.
-In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level. 
29 NC - No Connect
30 RD I Read Enable in 8080 MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
31 WR I Serial clock
-Write Enable in MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
32 D/C(SPI_SCL) I -Display data/command Selection Pin in MCU Interface.
-D/CX='1': Display Data or Parameter.
-D/CX='0': Command Data.
-In Serial Interface, this is used as SCL.
-If not used, please fix this pin at VDDI or DGND level.
33 CS(SPI_CS) I Chip enable
34 IOVCC P Interface Operation Voltage 
35 VCI P Analog Supply Voltage
36 GND P Ground
37-40 NC - No Connect

 

SKU: WF18-128160FD#0F0-FC
Brand: Winstar
Disponibile: No
Si tratta dela prima recensione per questo prodotto
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
25+
Prezzo
€11,10
€8,10
€7,00
€6,70

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€11,10 IVA esclusa

DESCRIPTION

 

Full color 128x160 TFT-LCD display module, diagonal size 1.77 inch. This module is built in with ST7735S IC; it supports 8080 8/16-bit parallel and serial 3-wire SPI interface. Module dimension of 34.0 x 45.83 mm and Active area size of 28.03 x 35.04 mm; it's supply voltage range from for analog is 2.5V to 4.8V.

It is a portrait mode LCD module, if you would like to use it as landscape mode, please contact us for more technical support. This 1.77” TFT LCD module is featured with brightness up to 500 cd/m2(typical value). Operating temperatures from -20℃ to 70℃; storage temperatures from -30℃ to 80℃.

 

DRAWING

1.77 inch 128x160 TFT ST7735 IC Display - WF18FTLAADNN0 - Winstar

INTERFACE

 

PinSymbolI/OFunction
1 VLED- P Back light cathode
2 VLED P Back light anode
3 IM0 I - MCU Parallel Interface Type Selection
-If Not Used, Please Fix this Pin at VDDI or DGND Level. 
4 IM1
5 IM2 I MCU Parallel Interface Bus and Serial Interface select
IM2='1', Parallel Interface
IM2='0', Serial Interface
6 RESET P Reset signal
7-12 NC - No Connect
13-28 DB15-DB0(SPI_SDA) I/O DB15:0] are used as MCU parallel interface data bus.
-DBis the serial input/output signal in serial interface mode.
-In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level. 
29 NC - No Connect
30 RD I Read Enable in 8080 MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
31 WR I Serial clock
-Write Enable in MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
32 D/C(SPI_SCL) I -Display data/command Selection Pin in MCU Interface.
-D/CX='1': Display Data or Parameter.
-D/CX='0': Command Data.
-In Serial Interface, this is used as SCL.
-If not used, please fix this pin at VDDI or DGND level.
33 CS(SPI_CS) I Chip enable
34 IOVCC P Interface Operation Voltage 
35 VCI P Analog Supply Voltage
36 GND P Ground
37-40 NC - No Connect

 

Specifiche di prodotto
Brand Winstar
Size 1.77"
Risoluzione 128x160
Area Attiva (mm) 28.03x35.04
Colore Full Color
Interfaccia Display MCU (Parallel/SPI)
Display IC ST7735S
Angolo Visione O-Film
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 1.77"
Risoluzione 128x160
Area Attiva (mm) 28.03x35.04
Colore Full Color
Interfaccia Display MCU (Parallel/SPI)
Display IC ST7735S
Angolo Visione O-Film
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di CNE5231XXXXXXXXXXX00

CNE5231XXXXXXXXXXX00

ZIF Connector 20 pins, 0.5mm pitch, Top contact
Da €2,40 IVA esclusa
Immagine di MOLEX_505278-2033

MOLEX_505278-2033

ZIF Connector 20 pins, 0.5mm pitch, Bottom contact
Da €1,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Prodotti in Vetrina
Copyright © 2023 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
;