Cerca
Filters
Close

WF40-480480ED#0PW0-FC

TFT 4'' 480x480, Square, LCD Module, Interface RGB, 500cd/m², Wide View Angle (IPS), Super extended temperature, No touch

DESCRIPTION

4 inch Square IPS TFT-LCD module; made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), 500 nits (typical value), glare surface panel, aspect Ratio 1:1. This model is also available in projected capacitive touch panel (PCAP) and resistive touch panel (RTP).

It is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. Operating temperature from -30℃ to +80℃; storage temperature range from -30℃ to +80℃.

 

DRAWING

SPECIFICATIONS

 

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 4.77 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA
SKU: WF40-480480ED#0PW0-FC
Brand: Winstar
Disponibile: No
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€23,00
€18,40
€16,90

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€23,00 IVA esclusa

DESCRIPTION

4 inch Square IPS TFT-LCD module; made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), 500 nits (typical value), glare surface panel, aspect Ratio 1:1. This model is also available in projected capacitive touch panel (PCAP) and resistive touch panel (RTP).

It is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. Operating temperature from -30℃ to +80℃; storage temperature range from -30℃ to +80℃.

 

DRAWING

SPECIFICATIONS

 

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 4.77 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA
Specifiche di prodotto
Brand Winstar
Size 4"
Risoluzione 480x480
Area Attiva (mm) 71.85x70.17
Colore Full Color
Interfaccia Display RGB
Display IC No
Angolo Visione IPS
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -30~80
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 4"
Risoluzione 480x480
Area Attiva (mm) 71.85x70.17
Colore Full Color
Interfaccia Display RGB
Display IC No
Angolo Visione IPS
Brightness Range Standard 100~600cd/m²
Frame No
Touch Panel No touch
Temperatura O. (°C) -30~80
Connessione Display FPC per ZIF Connector
Nr. Pin 40
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;