Menu
Search
Filters
Close
Menu

NT040-C001WS

Picture of NT040-C001WS Picture of NT040-C001WS
TFT 4" 480x480 Square LCD Panel, Interface RGB, 800cd/m², Wide View Angle (IPS), Super extended temperature, Capacitive touch panel I2C interface (GG)

DESCRIPTION

NT040-C001WS is a High Brightness 4 inch Square IPS TFT-LCD display module with projected capacitive touch panel (PCAP); made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 800 nits (typical value), anti-glare surface panel, aspect Ratio 1:1. 

NT040-C001WS Square TFT LCD display module is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. NT040-C001WS model can be operated at temperatures from -30℃ to +80℃; its storage temperatures range from -30℃ to +80℃.

 

DRAWING

 

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

PCAP PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit
 

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 7.17 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
PCAP IC ST1633I or equivalent
PCAP Interface I2C
PCAP FW Version: V01
Touch Panel Capacitive touch panel (PCAP)
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA
Supply PCAP VDDT 2.8 - 3.3 V
ICTP(mA) - 12.4 18.6 mA
SKU: NT040-C001WS
Brand: Next Vision Display
Available: No
Be the first to review this product
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
Price
€39.80
€33.20
€28.10

For quantities above 25 pcs pls send your enquiry to [email protected] or call +39 0332 1888005

€39.80 excl tax

DESCRIPTION

NT040-C001WS is a High Brightness 4 inch Square IPS TFT-LCD display module with projected capacitive touch panel (PCAP); made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 800 nits (typical value), anti-glare surface panel, aspect Ratio 1:1. 

NT040-C001WS Square TFT LCD display module is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. NT040-C001WS model can be operated at temperatures from -30℃ to +80℃; its storage temperatures range from -30℃ to +80℃.

 

DRAWING

 

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect

PCAP PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit
 

 

General Specifications

ItemDimensionUnit
Size 4.0 inch
Dot Matrix 480 × 3(RGB) × 480 dots
Module dimension 78.8(H) × 82.95 (W) × 7.17 mm
Active area 71.856(H) × 70.176 (V) mm
Dot pitch 0.1497(H) × 0.1462(V) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 1:1
Interface 24-bit RGB
Driver IC ST7701S or Equivalent
Backlight Type LED, Normally White
PCAP IC ST1633I or equivalent
PCAP Interface I2C
PCAP FW Version: V01
Touch Panel Capacitive touch panel (PCAP)
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolValuesUnit
Min.Typ.Max.
Interface Supply Voltage VCC 2.5 2.8 3.6 V
Current for Driver(White) IVCC - 27 40.5 mA
Supply PCAP VDDT 2.8 - 3.3 V
ICTP(mA) - 12.4 18.6 mA
Products specifications
Brand Next Vision Display
Size 4"
Resolution 480x480
Active Area (mm) 71.85x70.17
Color Full Color
Display Interface RGB
Display IC No
View Angle IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
O. Temperature (°C) -30~80
Display Connection FPC for ZIF Connector
Pin Nr. 40
Pin Pitch 0.5mm
Touch Panel IC Controller ST1633I
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Next Vision Display
Size 4"
Resolution 480x480
Active Area (mm) 71.85x70.17
Color Full Color
Display Interface RGB
Display IC No
View Angle IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
O. Temperature (°C) -30~80
Display Connection FPC for ZIF Connector
Pin Nr. 40
Pin Pitch 0.5mm
Touch Panel IC Controller ST1633I
Preferred - Not Preferred Preferred
Related products
Picture of CNR5231XXXXXXXXXXX01

CNR5231XXXXXXXXXXX01

ZIF Connector 40 pins, 0.5mm pitch, Top contact
From €2.40 excl tax
Picture of CNR6231XXXXXXXXXXX00

CNR6231XXXXXXXXXXX00

ZIF Connector 40 pins, 0.5mm pitch, Bottom contact
From €2.40 excl tax
Picture of CNR6231XXXXXXXXXXX02

CNR6231XXXXXXXXXXX02

ZIF Connector 40 pins, 0.5mm pitch, Bottom contact
From €2.40 excl tax
Picture of MOLEX_54104-4033

MOLEX_54104-4033

ZIF Connector 40 pins, 0.5mm pitch, Top contact
From €2.00 excl tax
Picture of MOLEX_54132-4033

MOLEX_54132-4033

ZIF Connector 40 pins, 0.5mm pitch, Bottom contact
From €1.90 excl tax
Picture of MOLEX_52745-1097

MOLEX_52745-1097

ZIF Connector 10 pins, 0.5mm pitch, Top contact
From €0.89 excl tax
Picture of MOLEX_52746-1033

MOLEX_52746-1033

ZIF Connector 10 pins, 0.5mm pitch, Bottom contact
From €0.82 excl tax
Categories
Recently viewed
Contacts
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • VAT number IT02764420127
    REA Varese 285686
    Social capital fully paid 100.000€
Information
Featured Products
Copyright © 2025 FIRST Components. All rights reserved.
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy