Search
Filters
Close

RYS8833

Ultra Low Power GNSS Module, UART / I2C Interface, 11*8*2.2mm
  • SONY CXD5605GF CXD5605AGF multi-GNSS receiver for GPS, GLONASS, SBAS, QZSS, BeiDou and Galileo.
  • Small SMD form factor 121mm^2
  • Enhanced GNSS Filter and Low Noise Amplifier
  • Ultra-low power consumption
  • Up to Position accuracy 1.0 m CEP
  • Embedded Antenna
  • Optional external antenna

The REYAX RYS8830 is built on the high performance of the SONY CXD5605GF CXD5605AGF GNSS engine.
The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.

 

Item

Min. Typical Max. Unit Condition
Power Supply Voltage 1.71 1.8 1.89 V VDD
  0.9 1.8 1.95 V VDD_LDO_IN

Satellite acquisition Current

  20   mA  
Satellite tracking Current   13   mA  
Idle Current   3   mA Waiting for command
Sleep0 mode current   0.6   mA  
Sleep1 mode current   200   uA  
Sleep2 mode current   200   uA  
           
I2C slave         I2C clock : 400kHz

 

Address length : 7 bits

Slave address : 0x24

Default Baud Rate    115200   bps 8,N,1
Digital input level high 0.7*VDD   VDD+0.3 V VIH
Digital input level low -0.3   0.3*VDD V VIL
Digital output level high 0.8*VDD   VDD V VOH 2mA
Digital output level low 0   0.2*VDD V VOL 2mA
Flash size   8   M-bit  
GNSS Center Frequency   1561.098

 

1575.42

1602.5625

  MHz BeiDou

 

GPS

Glonass

Navigation update rate   1   Hz  
Accuracy   1   M Signal strength is -130dBm
Cold starts   35   Sec. Signal strength is -130dBm
Hot starts   1   Sec.  
           
Tracking Sensitivity   -161   dBm  
Hot starts Sensitivity   -160   dBm  
Cold starts Sensitivity   -147   dBm  
Operating Temperature -40 25 +85 ˚C  
Dimensions         11mm*11mm*2.2mm
Weight   0.43   g

SKU: RYS8833
Brand: Reyax
Available: No
€9.00 excl tax
  • SONY CXD5605GF CXD5605AGF multi-GNSS receiver for GPS, GLONASS, SBAS, QZSS, BeiDou and Galileo.
  • Small SMD form factor 121mm^2
  • Enhanced GNSS Filter and Low Noise Amplifier
  • Ultra-low power consumption
  • Up to Position accuracy 1.0 m CEP
  • Embedded Antenna
  • Optional external antenna

The REYAX RYS8830 is built on the high performance of the SONY CXD5605GF CXD5605AGF GNSS engine.
The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.

 

Item

Min. Typical Max. Unit Condition
Power Supply Voltage 1.71 1.8 1.89 V VDD
  0.9 1.8 1.95 V VDD_LDO_IN

Satellite acquisition Current

  20   mA  
Satellite tracking Current   13   mA  
Idle Current   3   mA Waiting for command
Sleep0 mode current   0.6   mA  
Sleep1 mode current   200   uA  
Sleep2 mode current   200   uA  
           
I2C slave         I2C clock : 400kHz

 

Address length : 7 bits

Slave address : 0x24

Default Baud Rate    115200   bps 8,N,1
Digital input level high 0.7*VDD   VDD+0.3 V VIH
Digital input level low -0.3   0.3*VDD V VIL
Digital output level high 0.8*VDD   VDD V VOH 2mA
Digital output level low 0   0.2*VDD V VOL 2mA
Flash size   8   M-bit  
GNSS Center Frequency   1561.098

 

1575.42

1602.5625

  MHz BeiDou

 

GPS

Glonass

Navigation update rate   1   Hz  
Accuracy   1   M Signal strength is -130dBm
Cold starts   35   Sec. Signal strength is -130dBm
Hot starts   1   Sec.  
           
Tracking Sensitivity   -161   dBm  
Hot starts Sensitivity   -160   dBm  
Cold starts Sensitivity   -147   dBm  
Operating Temperature -40 25 +85 ˚C  
Dimensions         11mm*11mm*2.2mm
Weight   0.43   g

Products specifications
Brand Reyax
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Reyax
Preferred - Not Preferred Preferred
Recently viewed
;