Menu
Search
Filters
Close
Menu

WEO128128L#DP3D00001-FC

Picture of WEO128128L#DP3D00001-FC Picture of WEO128128L#DP3D00001-FC
PMOLED 1.18'' Graphic 128x128, Circular, Yellow color, COG, 3V, Interface SPI,I2C, Glare, Capacitive touch panel I2C (IC FT3268)

DESCRIPTION

Ø1.18” circular graphic OLED display; with capacitive touch screen on module; made of resolution 128x128 dots. This module is built in with SSD1327 IC, it supports 4-line SPI and I2C interface, supply voltage for logic 3V (typical value), 1/128 driving duty. This model is built in with FT3268 touch panel IC on module, which supports I2C interface, one detect point for capacitive touch screen.

This round OLED with CTP model is ideal for smart home applications, intelligent technology devices, energy systems, communication systems, medical instrument, etc. This module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +70℃.

 

DRAWING

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
VDD can be supplied externally (within the range of 2.4V to 2.6V) or regulated
Internally from VCI. A capacitor should be connected between VDD and VSS under all circumstances.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select.
Bus Interface selection
BS1Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, will be interpreted as data.
When the pin is pulled LOW, will be transferred to a command register
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 128 Dots
Module dimension Ø50.5 × 5.0 mm
Active Area Ø30.0 mm
Pixel Size 0.210 × 0.210 mm
Pixel Pitch 0.235 × 0.235 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128Duty
Gray Scale 4 bits
IC SSD1327
Interface 4-line SPI , I2C
Size 1.18 inch
 
CTP IC FT3268
Detect Point 1
CTP Interface I2C

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Operation VCI -0.3 3.6 V
Supply Voltage for Logic VDD -0.5 2.75 V
Supply Voltage for Display VCC -0.5 19.0 V
Operating Temperature TOP -20 +70 °C
Storage Temperature TSTG -30 +70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Operation VCI － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 8.0 14.5 15.0 V
Supply Voltage for Logic VDD － 1.65 － 2.6 V
High Level Input VIH － 0.8×VCI － VCI V
Low Level Input VIL － 0 － 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI － VCI V
Low Level Output VOL Iout = 100uA 0 － 0.1×VCI V
50% Check Board operating Current VCC =14.5V － 15 30 mA

 

Touch Panel Controller FT3268

ItemSymbolConditionMinTypMaxUnit
Input High Volt. VIH － 0.7×VDD － VDD V
Input Low Volt. VIL － -0.3 － 0.3×VDD V
Output High Volt. VOH IOH = 0.1mA 0.7×VDD － － V
Output Low Volt. VOL IOL = 0.1mA － － 0.3×VDD V

 

SKU: WEO128128L#DP3D00001-FC
Brand: Winstar
Available: No
Be the first to review this product
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
Price
€34.70
€27.80
€26.80

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€34.70 excl tax

DESCRIPTION

Ø1.18” circular graphic OLED display; with capacitive touch screen on module; made of resolution 128x128 dots. This module is built in with SSD1327 IC, it supports 4-line SPI and I2C interface, supply voltage for logic 3V (typical value), 1/128 driving duty. This model is built in with FT3268 touch panel IC on module, which supports I2C interface, one detect point for capacitive touch screen.

This round OLED with CTP model is ideal for smart home applications, intelligent technology devices, energy systems, communication systems, medical instrument, etc. This module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +70℃.

 

DRAWING

 

SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
VDD can be supplied externally (within the range of 2.4V to 2.6V) or regulated
Internally from VCI. A capacitor should be connected between VDD and VSS under all circumstances.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select.
Bus Interface selection
BS1Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, will be interpreted as data.
When the pin is pulled LOW, will be transferred to a command register
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

 

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 128 Dots
Module dimension Ø50.5 × 5.0 mm
Active Area Ø30.0 mm
Pixel Size 0.210 × 0.210 mm
Pixel Pitch 0.235 × 0.235 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/128Duty
Gray Scale 4 bits
IC SSD1327
Interface 4-line SPI , I2C
Size 1.18 inch
 
CTP IC FT3268
Detect Point 1
CTP Interface I2C

 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Operation VCI -0.3 3.6 V
Supply Voltage for Logic VDD -0.5 2.75 V
Supply Voltage for Display VCC -0.5 19.0 V
Operating Temperature TOP -20 +70 °C
Storage Temperature TSTG -30 +70 °C

 

Electronical Characteristics

DC Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Operation VCI － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 8.0 14.5 15.0 V
Supply Voltage for Logic VDD － 1.65 － 2.6 V
High Level Input VIH － 0.8×VCI － VCI V
Low Level Input VIL － 0 － 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI － VCI V
Low Level Output VOL Iout = 100uA 0 － 0.1×VCI V
50% Check Board operating Current VCC =14.5V － 15 30 mA

 

Touch Panel Controller FT3268

ItemSymbolConditionMinTypMaxUnit
Input High Volt. VIH － 0.7×VDD － VDD V
Input Low Volt. VIL － -0.3 － 0.3×VDD V
Output High Volt. VOH IOH = 0.1mA 0.7×VDD － － V
Output Low Volt. VOL IOL = 0.1mA － － 0.3×VDD V

 

Products specifications
Brand Winstar
Size 1.18"
Resolution 128x128
Active Area (mm) 30.00x30.00
Dot Size 0.21x0.21
Polarizer Glare
Color Yellow
Power supply 3V
Display Interface SPI/I2C
Display IC SSD1327
Constructive Structure COG
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~50
Display Connection FPC per ZIF Connector
Pin Nr. 18
Pin Pitch 0.5mm
Touch Panel IC Controller FT3268
Preferred - Not Preferred Not Preferred
Download
Products specifications
Brand Winstar
Size 1.18"
Resolution 128x128
Active Area (mm) 30.00x30.00
Dot Size 0.21x0.21
Polarizer Glare
Color Yellow
Power supply 3V
Display Interface SPI/I2C
Display IC SSD1327
Constructive Structure COG
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~50
Display Connection FPC per ZIF Connector
Pin Nr. 18
Pin Pitch 0.5mm
Touch Panel IC Controller FT3268
Preferred - Not Preferred Not Preferred
Related products
Picture of CND1231XXXXXXXXXXXX00

CND1231XXXXXXXXXXXX00

ZIF Connector 18 pins, 0.5mm pitch, Top contact
From €2.40 excl tax
Picture of TSL128128DF191XXXX01

TSL128128DF191XXXX01

Capacitive Touch panel 1.18'', O.D. 50.00x50.00mm for PMOLED, I2C interface, Detect point 1 finger, Glass-Glass structure, FPC per ZIF Connector (WEO128128D family soldered on OLED FPC)
From €15.10 excl tax
Picture of CND5231XXXXXXXXXXX02

CND5231XXXXXXXXXXX02

ZIF Connector 18 pins, 0.5mm pitch, Top contact
From €2.40 excl tax
Categories
Recently viewed
Contacts
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • VAT number IT02764420127
    REA Varese 285686
    Social capital fully paid 100.000€
Information
Featured Products
Copyright © 2023 FIRST Components. All rights reserved.
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
;