Search
Filters
Close

WF101-1024600JH#VSP8-FC

TFT 10.1'' 1024x600, HDMI / Raspberry Interface, IC EK79001HN + EK73215BCGA, High Brightness 850cd/m², Wide View Angle (IPS), Incl. 2 connectors, Capacitive touch panel with USB interface (GG), Suitable for Raspberry Pi 1~3 & Pi3B+ versions

DESCRIPTION

10.1-inch high brightness version IPS TFT display with resolution 1024x600 pixels. It has a PCB board featuring an HDMI connector that supports HDMI signal (Only for DVI) interface and has a 40-pin GPIO connector designed to make Raspberry Pi usage easy. This module featured four studs for the backlight, and the PCB adopted the locking method attached to the module. WF101JSYFHLHBV is adopted IPS panel which has a wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical value). This TFT model is built-in with EK79001HN and EK73215BCGA driver ICs, high brightness of 850 nits (typical value). This TFT model is built-in with ILI2511 touch panel driver IC on the module, which supports USB interface, and single-touch or multi-touch (option) detection points.

The supply voltage for LCM (VDD) is 4.7~5.3V, typical value 5V, glare surface glass, aspect ratio 16:9, contrast ratio 800:1 (typical value). It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.

DRAWING

 

SPECIFICATIONS

 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1024 RGB X 600 dots
Module dimension 235(W) x143(H) x 27.96(MAX)(D) mm
Active area 222.72 (H) x 125.28(V) mm
Pixel pitch 0.2175(W) x 0.2088(H) mm
Display Mode TFT, Normally Black, Transmissive
Viewing Angle 85/85/85/85
Color arrangement RGB-STRIPE
Aspect Ratio 16:9
Driver IC EK79001HN + EK73215BCGA or equivalent
Backlight Type LED,Normally White
Electrical Interface (Logic) HDMI(only for DVI)
PCAP IC ILI2511 or equivalent
PCAP Interface USB
PCAP FW Version: V6.0.0.0.62.90.1.2
Touch Panel With PCAP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 4.7 5 5.3 V
Supply Current For LCM IDD 1.7 2.6 A
LED life time 50000 Hr

 

Interface

1.CON6

Pin No.SymbolFunction
1 NC No connection
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)
Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 NC No connection
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

 

2.CON5

Pin No.SymbolFunction
1 3.3V TFT Module Power limit can only output 3.3V,100mA
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)
Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 3.3V TFT Module Power limit can only output 3.3V,100mA
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

 

3.PCAP USB PIN Definition

PinSymbolFunction
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground
I: input, O: output, P: Power

 

4.DVI

Pin No.SymbolI/OFunction
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 SCL I/O DDC(Data Display Channel) Clock
16 SDA I/O DDC(Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detect I/O Hot plug detect

 

5.Power-Jack

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC - No connection


 
SKU: WF101-1024600JH#VSP8-FC
Brand: Winstar
Available: No
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
Price
€170.70
€167.80
€136.40

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€170.70 excl tax

DESCRIPTION

10.1-inch high brightness version IPS TFT display with resolution 1024x600 pixels. It has a PCB board featuring an HDMI connector that supports HDMI signal (Only for DVI) interface and has a 40-pin GPIO connector designed to make Raspberry Pi usage easy. This module featured four studs for the backlight, and the PCB adopted the locking method attached to the module. WF101JSYFHLHBV is adopted IPS panel which has a wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical value). This TFT model is built-in with EK79001HN and EK73215BCGA driver ICs, high brightness of 850 nits (typical value). This TFT model is built-in with ILI2511 touch panel driver IC on the module, which supports USB interface, and single-touch or multi-touch (option) detection points.

The supply voltage for LCM (VDD) is 4.7~5.3V, typical value 5V, glare surface glass, aspect ratio 16:9, contrast ratio 800:1 (typical value). It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.

DRAWING

 

SPECIFICATIONS

 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1024 RGB X 600 dots
Module dimension 235(W) x143(H) x 27.96(MAX)(D) mm
Active area 222.72 (H) x 125.28(V) mm
Pixel pitch 0.2175(W) x 0.2088(H) mm
Display Mode TFT, Normally Black, Transmissive
Viewing Angle 85/85/85/85
Color arrangement RGB-STRIPE
Aspect Ratio 16:9
Driver IC EK79001HN + EK73215BCGA or equivalent
Backlight Type LED,Normally White
Electrical Interface (Logic) HDMI(only for DVI)
PCAP IC ILI2511 or equivalent
PCAP Interface USB
PCAP FW Version: V6.0.0.0.62.90.1.2
Touch Panel With PCAP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD 4.7 5 5.3 V
Supply Current For LCM IDD 1.7 2.6 A
LED life time 50000 Hr

 

Interface

1.CON6

Pin No.SymbolFunction
1 NC No connection
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)
Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 NC No connection
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

 

2.CON5

Pin No.SymbolFunction
1 3.3V TFT Module Power limit can only output 3.3V,100mA
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)
Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 3.3V TFT Module Power limit can only output 3.3V,100mA
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

 

3.PCAP USB PIN Definition

PinSymbolFunction
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground
I: input, O: output, P: Power

 

4.DVI

Pin No.SymbolI/OFunction
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 SCL I/O DDC(Data Display Channel) Clock
16 SDA I/O DDC(Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detect I/O Hot plug detect

 

5.Power-Jack

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC - No connection


 
Products specifications
Brand Winstar
Size 10.1"
Resolution 1024x600
Active Area (mm) 222.72x125.28
Color Full Color
Display Interface HDMI
View Angle IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection HDMI Connector / Raspberry Connector
Touch Panel IC Controller ILI2511
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Winstar
Size 10.1"
Resolution 1024x600
Active Area (mm) 222.72x125.28
Color Full Color
Display Interface HDMI
View Angle IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection HDMI Connector / Raspberry Connector
Touch Panel IC Controller ILI2511
Preferred - Not Preferred Preferred
Recently viewed
;