Menu
Search
Filters
Close
Menu

WF70-1024600A8H#0SP0-FC

TFT 7" 1024x600, HDMI Interface, IC TFP401, Wide view angle (IPS), High Brightness 1100cd/m², No Touch (No Raspberry Connectors)

DESCRIPTION

 

Winstar 7" medium-sized supporting for HDMI signal display, made of high resolution 1024x600 dots. This 7 inch TFT Display comes with a board which supports HDMI signal interface and a 40-pin connector on it; it is designed to make Raspberry Pi usage become easily. 

You can simply use this medium-sized TFT display with your Raspberry Pi, and also you can use it as computer display with any device which supports HDMI signal output. This 7" TFT model comes in 1024x600 resolutions that is high quality and would be good for embedded computing usage. Please note, this part no. does not include a HDMI connector or USB cable.

 

 

DRAWING

SPECIFICATIONS


Interface

1. HDMI

PinSymbolI/0Function
1 Rx2+ I Channel-2 positive receiver input; low-voltage signal differential-input pair.
2 GND P Ground
3 Rx2- I Channel-2 negative receiver input; low-voltage signal differential-input pair.
4 Rx1+ I Channel-1 positive receiver input; low-voltage signal differential-input pair.
5 GND P Ground
6 Rx1- I Channel-1 negative receiver input; low-voltage signal differential-input pair.
7 Rx0+ I Channel-0 positive receiver input; low-voltage signal differential-input pair.
8 GND P Ground
9 Rx0- I Channel-0 negative receiver input; low-voltage signal differential-input pair.
10 RxC+ I Clock positive receiver input: low-voltage signal differential - input pair
11 GND P Ground
12 RxC- I Clock negative receiver input; low-voltage signal differential - input pair
13-14 NC - No connection
15 SCL I/O DDC (Data Display Channel) Clock
16 SDA I/O DDC (Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detact I/O Hot plug detact
  

4. POWER JACK

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC   No connection
 
 

General Specifications

ItemDimensionUnit
Size 7.0 inch
Dot Matrix 1024 × RGB × 600(TFT) dots
Module dimension 169.9(W) × 103.4(H) × 22.0(D) mm
Active area 154.2114 × 85.92 mm
Dot pitch 0.1506 × 0.1432 mm
LCD type TFT, Normally White, Transmissive
View Direction 85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC TFP401 or equivalent
TFT Interface Support HDMI Connector (Only DVI Signal)
Touch Screen No
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 4.9 5 5.1 V
Supply Current For LCM IDD － － 1635 2453 mA
LED life time － － － 50,000 － Hr
SKU: WF70-1024600A8H#0SP0-FC
Brand: Winstar
Available: No
Be the first to review this product
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
Price
€73.80
€66.50
€54.90

For quantities above 25 pcs pls send your enquiry to [email protected] or call +39 0332 1888005

€73.80 excl tax

DESCRIPTION

 

Winstar 7" medium-sized supporting for HDMI signal display, made of high resolution 1024x600 dots. This 7 inch TFT Display comes with a board which supports HDMI signal interface and a 40-pin connector on it; it is designed to make Raspberry Pi usage become easily. 

You can simply use this medium-sized TFT display with your Raspberry Pi, and also you can use it as computer display with any device which supports HDMI signal output. This 7" TFT model comes in 1024x600 resolutions that is high quality and would be good for embedded computing usage. Please note, this part no. does not include a HDMI connector or USB cable.

 

 

DRAWING

SPECIFICATIONS


Interface

1. HDMI

PinSymbolI/0Function
1 Rx2+ I Channel-2 positive receiver input; low-voltage signal differential-input pair.
2 GND P Ground
3 Rx2- I Channel-2 negative receiver input; low-voltage signal differential-input pair.
4 Rx1+ I Channel-1 positive receiver input; low-voltage signal differential-input pair.
5 GND P Ground
6 Rx1- I Channel-1 negative receiver input; low-voltage signal differential-input pair.
7 Rx0+ I Channel-0 positive receiver input; low-voltage signal differential-input pair.
8 GND P Ground
9 Rx0- I Channel-0 negative receiver input; low-voltage signal differential-input pair.
10 RxC+ I Clock positive receiver input: low-voltage signal differential - input pair
11 GND P Ground
12 RxC- I Clock negative receiver input; low-voltage signal differential - input pair
13-14 NC - No connection
15 SCL I/O DDC (Data Display Channel) Clock
16 SDA I/O DDC (Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detact I/O Hot plug detact
  

4. POWER JACK

Pin No.SymbolI/OFunction
1 5V P Power Supply (5V)
2 GND P Ground
3 NC   No connection
 
 

General Specifications

ItemDimensionUnit
Size 7.0 inch
Dot Matrix 1024 × RGB × 600(TFT) dots
Module dimension 169.9(W) × 103.4(H) × 22.0(D) mm
Active area 154.2114 × 85.92 mm
Dot pitch 0.1506 × 0.1432 mm
LCD type TFT, Normally White, Transmissive
View Direction 85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC TFP401 or equivalent
TFT Interface Support HDMI Connector (Only DVI Signal)
Touch Screen No
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 4.9 5 5.1 V
Supply Current For LCM IDD － － 1635 2453 mA
LED life time － － － 50,000 － Hr
Products specifications
Brand Winstar
Size 7"
Resolution 1024x600
Active Area (mm) 154.21x85.92
Color Full Color
Display Interface HDMI
View Angle IPS
Frame No
Touch Panel No touch
O. Temperature (°C) -20~70
Display Connection HDMI Connector
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Winstar
Size 7"
Resolution 1024x600
Active Area (mm) 154.21x85.92
Color Full Color
Display Interface HDMI
View Angle IPS
Frame No
Touch Panel No touch
O. Temperature (°C) -20~70
Display Connection HDMI Connector
Preferred - Not Preferred Preferred
Related products
Picture of WWHDMI-00#

WWHDMI-00#

HDMI Connector for TFT module and Raspberry Pi 3B+ Version or below Version
From €2.60 excl tax
Picture of CABLE_HDMI

CABLE_HDMI

HDMI Cable V1.4 High speed, with Ethernet, Male-male connectors, 1.5 meters
€18.10 excl tax
Picture of POWER_ADAPT_5V/2A

POWER_ADAPT_5V/2A

Power Adapter Input 100/240VAC Output Jack 5V 2A (OTP***195)
€8.00 excl tax
Categories
Recently viewed
Contacts
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • VAT number IT02764420127
    REA Varese 285686
    Social capital fully paid 100.000€
Information
Featured Products
Copyright © 2025 FIRST Components. All rights reserved.
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy