Cerca
Italiano
Catalogo
    Menu Chiudi

    WEA160128W#AP3N00000-FC

    PMOLED 1.92" Graphic 160x128, White, COG + PCB, 3V, Interface SPI, Glare (SH1108)
    Brand: Winstar
    Cod.: WEA160128W#AP3N00000-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €22,40
    €20,10
    €18,90

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €22,40 IVA esclusa
    i h

    RECOMMENDED ONLY AS SPARE PARTS

    For new projects please contact us at [email protected].

     

    DESCRIPTION

    It’s diagonal size 1.92 inch, made of 160x128 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. This module is built in with SH1108 IC; it supports 4-wire SPI interface, 1/128 driving duty, supply voltage for logic is from 3V, the display current with 50% checkerboard is 100 mA @3.0 VDD (typical value). The module is having a PCB board on module which is suitable for customers to use wire connection; customers do not need to develop extra PCB for their applications. The module provides a standard metal PIN (2.54mm pin hole) for customer to connect to the product. The PCB has been designed with a boost circuit, and customers only need to provide a set of VDD voltage to use.

    This OLED module is suitable for smart home application, medical device, smart control, meter, etc. WEA160128A module can be operating at temperatures from -40°C to +80°C; its storage temperatures range from -40°C to +85°C.

    DRAWING

     

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 GND Ground.
    2 VCC Power supply pin for logic.
    3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
    4 D1
    5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
    6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
    D/C = “H”: the inputs at D0 and D1 are treated as display data.
    D/C = “L”: the inputs at D0 and D1 are transferred to the command registers.
    7 CS# This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data command I/O is enabled.

     

    General Specification

    ItemDimensionUnit
    Dot Matrix 160 × 128 Dots -
    Module dimension 34.90 × 57.80 × 5.36 Max. mm
    Active Area 28.908 × 39.34 mm
    Pixel Size 0.206 × 0.226 mm
    Pixel Pitch 0.226 × 0.246 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/128 Duty
    IC SH1108
    Interface 4-line SPI
    Size 1.92 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VCC -0.3 3.6 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C
     

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VCC - 1.65 3.0 3.3 V
    Input High Volt. VIH - 0.8×VCC - VCC V
    Input Low Volt. VIL - GND - 0.2×VCC V
    Output High Volt. VOH - 0.8×VCC - VCC V
    Output Low Volt. VOL - GND - 0.2×VCC V
    50% Check Board operating Current ICC VCC=3V - 100 200 mA
    Specifiche di prodotto
    Size 1.92"
    Resolution 160x128
    Active Area (mm) 28.92x39.34
    Dot Size 0.21x0.23
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface SPI
    Display IC SH1108
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Pin Strip
    Pin Nr. 8
    Pin Pitch 2.54mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni