Search
Filters
Close

WL0F00043000WGAABSA00-FC

TFT 4.3'' 480x272, CAN Bus Communication Interface Differential ± 3.3, 400cd/m², Wide View Angle (IPS), Super Extended Temperature, Capacitive Touch Panel, Free Template

DESCRIPTION

New 4.3” CAN display which supports Custom CAN ID

4.3 Inch Smart Display Feature:

  • DC 5V working voltage.
  • Self-testing after booting function.
  • CAN bus communication interface.
  • Supports Custom CAN ID protocol, default baud rate at 250KB.
  • Built in flash memory, store the fonts and pictures.
  • Support capacitive touch panel (CTP).
  • Smart Display scenario is slave device display and action from Master Device instruction.
  • Embedded buzzer controlled by Master Device.
  • Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
  • Design the UI without writing a line of code by winstar GUI builder! (►Link to GUI Builder Introduction)

 

DRAWING

 

 

SPECIFICATIONS

General Specifications

Mechanical Data

ItemStandard ValueUnit
LCD panel 105.5(W) × 67.2(H) × 4.6(D) mm
PCB 119.3(W) × 67.2(H) × 1.6 mm
Housing outline NA mm
 

General information

ItemStandard ValueUnit
Operating voltage 5 Vdc
Communication Interface CAN bus differential ± 3.3 Vpp
MCU STM32F750 N/A
Flash Memory 16 MB
SDRAM Frequency 108 MHz
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.6(D) mm
Active area 95.04(W) × 53.856 (H) mm
Dot pitch 0.066 (W) × 0.198(H) mm
Backlight Type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
With /Without TP With Projected Capacitive Touch Panel (PCAP)
Surface Glare
 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80
 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage VCC 4.5 5 5.5 V
Supply Current ICC - 330   mA
 

BOM

ItemDescription
LCM WF43WT***
PCBA SV10004***

 

Interface Pin Function

CN1 definition

PinSymbolFunctionRemark
1 GND GND Output
2-3 NC    
4 +5V +5V Output
5 GND GND Output
6-7 NC    
8 +5V +5V Output
9-10 NC Connection  
11 GND GND Output
12   GND GND Output
13 CAN_L Differential signal D- I/O
14 CAN_H Differential signal D+ I/O
15 GND Power supply GND input Input
16 +5V Power supply 5V input Input
 

CN2 definition

PinSymbolFunctionRemark
1-9 NC   -
10 GND GND Output
11 SYS_JTAG_SWO Data pin for JTAG interface I/O
12 NRST Reset pin for JTAG interface Input
13 SYS_JTAG_SWDIO Data pin for JTAG interface I/O
14 GND GND for JTAG interface Output
15 SYS_JTAG_SWCLK CLK pin for JTAG interface Input
16 VMCU 3.3V power for JTAG interface Output
SKU: WL0F00043000WGAABSA00-FC
Brand: Winstar
Available: Yes
Price Breaks
Quantity
1+
5+
10+
Price
€91.50
€80.90
€77.10

For quantities above 25 pcs pls send your enquiry to sales@first-components.com or call +39 0332 1888005

€91.50 excl tax

DESCRIPTION

New 4.3” CAN display which supports Custom CAN ID

4.3 Inch Smart Display Feature:

  • DC 5V working voltage.
  • Self-testing after booting function.
  • CAN bus communication interface.
  • Supports Custom CAN ID protocol, default baud rate at 250KB.
  • Built in flash memory, store the fonts and pictures.
  • Support capacitive touch panel (CTP).
  • Smart Display scenario is slave device display and action from Master Device instruction.
  • Embedded buzzer controlled by Master Device.
  • Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
  • Design the UI without writing a line of code by winstar GUI builder! (►Link to GUI Builder Introduction)

 

DRAWING

 

 

SPECIFICATIONS

General Specifications

Mechanical Data

ItemStandard ValueUnit
LCD panel 105.5(W) × 67.2(H) × 4.6(D) mm
PCB 119.3(W) × 67.2(H) × 1.6 mm
Housing outline NA mm
 

General information

ItemStandard ValueUnit
Operating voltage 5 Vdc
Communication Interface CAN bus differential ± 3.3 Vpp
MCU STM32F750 N/A
Flash Memory 16 MB
SDRAM Frequency 108 MHz
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.6(D) mm
Active area 95.04(W) × 53.856 (H) mm
Dot pitch 0.066 (W) × 0.198(H) mm
Backlight Type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
With /Without TP With Projected Capacitive Touch Panel (PCAP)
Surface Glare
 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80
 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage VCC 4.5 5 5.5 V
Supply Current ICC - 330   mA
 

BOM

ItemDescription
LCM WF43WT***
PCBA SV10004***

 

Interface Pin Function

CN1 definition

PinSymbolFunctionRemark
1 GND GND Output
2-3 NC    
4 +5V +5V Output
5 GND GND Output
6-7 NC    
8 +5V +5V Output
9-10 NC Connection  
11 GND GND Output
12   GND GND Output
13 CAN_L Differential signal D- I/O
14 CAN_H Differential signal D+ I/O
15 GND Power supply GND input Input
16 +5V Power supply 5V input Input
 

CN2 definition

PinSymbolFunctionRemark
1-9 NC   -
10 GND GND Output
11 SYS_JTAG_SWO Data pin for JTAG interface I/O
12 NRST Reset pin for JTAG interface Input
13 SYS_JTAG_SWDIO Data pin for JTAG interface I/O
14 GND GND for JTAG interface Output
15 SYS_JTAG_SWCLK CLK pin for JTAG interface Input
16 VMCU 3.3V power for JTAG interface Output
Products specifications
Brand Winstar
Size 4.3"
Resolution 480x272
Active Area (mm) 95.04x53.85
Color Full Color
Power supply 5V
Display Interface CAN Bus
View Angle IPS
Frame Yes
Touch Panel Capacitive
O. Temperature (°C) -30~80
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Winstar
Size 4.3"
Resolution 480x272
Active Area (mm) 95.04x53.85
Color Full Color
Power supply 5V
Display Interface CAN Bus
View Angle IPS
Frame Yes
Touch Panel Capacitive
O. Temperature (°C) -30~80
Preferred - Not Preferred Preferred
Recently viewed
;