Cerca
Filters
Close

WF101-1280800LPL#0SP3-FC

TFT 10.1'' 1280x800, LCD Module, Interface LVDS, High brightness 900cd/m², Wide view angle (IPS), Glare, Capacitive touch panel with I2C interface (GT928 IC)

 

DESCRIPTION

 

It is a 10’1” IPS TFT LCD Display with 1280x800 (WXGA) pixels. This TFT module adopted IPS technology which has the advantage of a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degrees. It is built-in with EK79202B1 driver IC, supports LVDS interface, with high brightness of 900 nits (typical value), aspect ratio of 16:10, contrast ratio of 1000:1 (typical value).

This model featured a projected capacitive touch panel (PCAP) which is built-in with GT928 IC and supports I2C interface, glare surface for cover lens. The power supply voltage for LCM is 12V (typical value). It can operate at operating temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.

 

DRAWING

 



SPECIFICATIONS

 

Interface

LCM PIN Definition

Pin No.SymbolI/OFunction
1 DC12V P Power Supply
2 DC12V P Power Supply
3 DC12V P Power Supply
4 NC - No connection
5 GND P Ground
6 GND P Ground
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 PWM   This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin.
24 NC - No connection
25 DC3V P Power Supply
26 NC - No connection
27 GND P Ground
28 SDA I/O Serial communication data input.
29 SCL I Serial communication clock input
30 INT O External interrupt to the host
31 RST I External Reset, Low is active
32 GND P Ground
33~43 NC - No connection
44 GND P Ground
45 GND P Ground
46 GND P Ground
47 NC - No connection
48 DC12V P Power Supply
49 DC12V P Power Supply
50 DC12V P Power Supply
 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1280 x 3(RGB) x 800 dots
Module dimension 257.96 × 168.6 × 25.88 mm
Active area 216.96 (H) × 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black , Transmissive
Viewing Angle 80/80/80/80
Pixel Arrangement R.G.B. Vertical Stripe
TFT Drive IC EK79202B1 or Equivalent
Backlight Type LED,Normally White
Aspect Ratio 16:10
TFT Interface LVDS
PCAP FW Version 80
PCAP IC GT928 or Equivalent
PCAP Interface I2C
PCAP Resolution 1280*800
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolMinTypMaxUnit
Supply Voltage For LCM +12V DC12V - 12.0 - V
Supply Current For LCM +12V IDC12V - 620 950 mA
Supply Voltage For PCAP (I2C) DC3V 3.15 3.3 3.45 V
Supply Current For PCAP (I2C) IDC3V - 14 21 mA
 

Backlight Characteristics

ParameterSymbolMinTypMaxUnit
PWM Control Level (LED_PWM) High Level - 3.3 - V
Low Level - 0 - V
PWM Control Duty Ratio - 1 - 100 %
PWM Control Frequency - - 10K - Hz
LED Life Time - 50,000 - - Hr
SKU: WF101-1280800LPL#0SP3-FC
Brand: Winstar
Disponibile: No
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€164,80
€162,00
€131,70

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€164,80 IVA esclusa

 

DESCRIPTION

 

It is a 10’1” IPS TFT LCD Display with 1280x800 (WXGA) pixels. This TFT module adopted IPS technology which has the advantage of a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degrees. It is built-in with EK79202B1 driver IC, supports LVDS interface, with high brightness of 900 nits (typical value), aspect ratio of 16:10, contrast ratio of 1000:1 (typical value).

This model featured a projected capacitive touch panel (PCAP) which is built-in with GT928 IC and supports I2C interface, glare surface for cover lens. The power supply voltage for LCM is 12V (typical value). It can operate at operating temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.

 

DRAWING

 



SPECIFICATIONS

 

Interface

LCM PIN Definition

Pin No.SymbolI/OFunction
1 DC12V P Power Supply
2 DC12V P Power Supply
3 DC12V P Power Supply
4 NC - No connection
5 GND P Ground
6 GND P Ground
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 PWM   This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin.
24 NC - No connection
25 DC3V P Power Supply
26 NC - No connection
27 GND P Ground
28 SDA I/O Serial communication data input.
29 SCL I Serial communication clock input
30 INT O External interrupt to the host
31 RST I External Reset, Low is active
32 GND P Ground
33~43 NC - No connection
44 GND P Ground
45 GND P Ground
46 GND P Ground
47 NC - No connection
48 DC12V P Power Supply
49 DC12V P Power Supply
50 DC12V P Power Supply
 

General Specifications

ItemDimensionUnit
Screen Diagonal 10.1 inch
Number of Pixels 1280 x 3(RGB) x 800 dots
Module dimension 257.96 × 168.6 × 25.88 mm
Active area 216.96 (H) × 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black , Transmissive
Viewing Angle 80/80/80/80
Pixel Arrangement R.G.B. Vertical Stripe
TFT Drive IC EK79202B1 or Equivalent
Backlight Type LED,Normally White
Aspect Ratio 16:10
TFT Interface LVDS
PCAP FW Version 80
PCAP IC GT928 or Equivalent
PCAP Interface I2C
PCAP Resolution 1280*800
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

Typical Operation Conditions

ItemSymbolMinTypMaxUnit
Supply Voltage For LCM +12V DC12V - 12.0 - V
Supply Current For LCM +12V IDC12V - 620 950 mA
Supply Voltage For PCAP (I2C) DC3V 3.15 3.3 3.45 V
Supply Current For PCAP (I2C) IDC3V - 14 21 mA
 

Backlight Characteristics

ParameterSymbolMinTypMaxUnit
PWM Control Level (LED_PWM) High Level - 3.3 - V
Low Level - 0 - V
PWM Control Duty Ratio - 1 - 100 %
PWM Control Frequency - - 10K - Hz
LED Life Time - 50,000 - - Hr
Specifiche di prodotto
Brand Winstar
Size 10.1"
Risoluzione 1280x800
Area Attiva (mm) 216.96x135.60
Colore Full Color
Interfaccia Display LVDS
Display IC No
Angolo Visione IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 50
Passo Pin 0.5mm
IC Controller Touch Panel GT928
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 10.1"
Risoluzione 1280x800
Area Attiva (mm) 216.96x135.60
Colore Full Color
Interfaccia Display LVDS
Display IC No
Angolo Visione IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Capacitive
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 50
Passo Pin 0.5mm
IC Controller Touch Panel GT928
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;