Menu
Cerca
Filters
Close
Menu

WO240128-85HB#FC

Immagine di WO240128-85HB#FC Immagine di WO240128-85HB#FC
Graphic LCD 4.8'' 240x128, B/L white, FSTN white pos, COG, 3V, Interface 6800/8080/SPI, 6 O'clock

DESCRIPTION

Monochrome COG graphic LCD module made of 240x128 pixels, diagonal size 4.8 inch. This COG LCD Module is built in with ST7586S controller IC; it supports 6800 8-bit, 8080 8-bit parallel and 3-line 9-bit /4-line 8-bit serial SPI interface. This COG has the same Active Area dimension and View Area as COB WG240128B, but this COG is much thinner than WG240128B. If the customers require 4.8” thinner module for new design, it is a good choice.

Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃. Different LCD mode options; STN Negative blue with white LED backlight, and FSTN positive white with white LED backlight. 

 

DRAWING

Chip on Glass LCD Module 240x128 - WO240128B

SPECIFICATIONS

Interface Pin Function

Pin No.SymbolDescription
1 ESD GND Electro-Static discharge
2 VG VG is the power of SEG-drivers
3 XV0 Negative operating voltage of COM-drivers
4 V0 Positive operating voltage of COM-drivers
5 VM VM is the non-select voltage level of COM-drivers
6 VDDA Power supply
7 VSS Ground
8 VD1 Digital power source selection
9 VDDI VDD1 is the power of interface I/O circuit
10 CSB Chip select input pin
CSB=“L”: This chip is selected and the MPU interface is active
CSB=“H”: This chip is not selected and the MPU interface is disabled
(D[7:0] are high impedance)
11
12
13		 IF3
IF2
IF1		 These pins select interface operation mode

Note: Refer to “Interface Selection” for detailed information
14 RSTB Reset input pin. When RSTB is “L”, internal initialization procedure is executed
15 /RD(E) Read / Write execution control pin. (This pin is only used in parallelinterface)

This pin is not used in serial interfaces and should be connected to VDD1
16~23 D7~D0 The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance
If using serial interface:
D0 is the SDA signal in 4-Line & 3-Line interface
D1 is the A0 signal in 4-Line interface
24 /WR/(R/W) Read / Write execution control pin. (This pin is only used in parallel interface)

This pin is not used in serial interfaces and should be connected to VDD1
25 A0(SCL) The function of this pin is different in parallel and serial interface
In parallel interface: A0 is register selection input
A0 = "H": inputs on data bus are display data
A0 = "L": inputs on data bus are command
In serial interface: this pad will be used as SCL (serial-clock) input
26 ESD GND Electro-Static discharge

 

Mechanical Data

ItemDimensionUnit
Number of dots 240 × 128 －
Module dimension 122.2 × 79.8 × 6.5 mm
View area 114.0 × 64.0 mm
Active area 107.98 × 57.58 mm
Dot size 0.43 × 0.43 mm
Dot pitch 0.45 × 0.45 mm
Drive Method 1/128Duty，1/12Bias
Backlight Type LED
IC ST7586S

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃
Digital Power Supply Voltage VDDI -0.3 － 3.6 V
Analog Power supply voltage VDDA -0.3 － 3.6 V
LCD Power supply voltage V0-XV0 -0.3 － 19 V
LCD Power supply voltage VG -0.3 － 5.5 V

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 3.0 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=+70℃		 －
14.8
－		 －
15.0
－		 －
15.2
－		 V
V
V
Input High Volt. VIH － 0.7VDD － VDD V
Input Low Volt. VIL － Vss － 0.3 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － Vss － 0.2VDD V
Supply Current IDD VDD=3.3V － － 2.0 mA


SKU: WO240128-85HB#FC
Brand: Winstar
Disponibile: Si
Si tratta dela prima recensione per questo prodotto
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€27,40
€21,90
€21,10

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€27,40 IVA esclusa

DESCRIPTION

Monochrome COG graphic LCD module made of 240x128 pixels, diagonal size 4.8 inch. This COG LCD Module is built in with ST7586S controller IC; it supports 6800 8-bit, 8080 8-bit parallel and 3-line 9-bit /4-line 8-bit serial SPI interface. This COG has the same Active Area dimension and View Area as COB WG240128B, but this COG is much thinner than WG240128B. If the customers require 4.8” thinner module for new design, it is a good choice.

Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃. Different LCD mode options; STN Negative blue with white LED backlight, and FSTN positive white with white LED backlight. 

 

DRAWING

Chip on Glass LCD Module 240x128 - WO240128B

SPECIFICATIONS

Interface Pin Function

Pin No.SymbolDescription
1 ESD GND Electro-Static discharge
2 VG VG is the power of SEG-drivers
3 XV0 Negative operating voltage of COM-drivers
4 V0 Positive operating voltage of COM-drivers
5 VM VM is the non-select voltage level of COM-drivers
6 VDDA Power supply
7 VSS Ground
8 VD1 Digital power source selection
9 VDDI VDD1 is the power of interface I/O circuit
10 CSB Chip select input pin
CSB=“L”: This chip is selected and the MPU interface is active
CSB=“H”: This chip is not selected and the MPU interface is disabled
(D[7:0] are high impedance)
11
12
13		 IF3
IF2
IF1		 These pins select interface operation mode

Note: Refer to “Interface Selection” for detailed information
14 RSTB Reset input pin. When RSTB is “L”, internal initialization procedure is executed
15 /RD(E) Read / Write execution control pin. (This pin is only used in parallelinterface)

This pin is not used in serial interfaces and should be connected to VDD1
16~23 D7~D0 The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance
If using serial interface:
D0 is the SDA signal in 4-Line & 3-Line interface
D1 is the A0 signal in 4-Line interface
24 /WR/(R/W) Read / Write execution control pin. (This pin is only used in parallel interface)

This pin is not used in serial interfaces and should be connected to VDD1
25 A0(SCL) The function of this pin is different in parallel and serial interface
In parallel interface: A0 is register selection input
A0 = "H": inputs on data bus are display data
A0 = "L": inputs on data bus are command
In serial interface: this pad will be used as SCL (serial-clock) input
26 ESD GND Electro-Static discharge

 

Mechanical Data

ItemDimensionUnit
Number of dots 240 × 128 －
Module dimension 122.2 × 79.8 × 6.5 mm
View area 114.0 × 64.0 mm
Active area 107.98 × 57.58 mm
Dot size 0.43 × 0.43 mm
Dot pitch 0.45 × 0.45 mm
Drive Method 1/128Duty，1/12Bias
Backlight Type LED
IC ST7586S

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃
Digital Power Supply Voltage VDDI -0.3 － 3.6 V
Analog Power supply voltage VDDA -0.3 － 3.6 V
LCD Power supply voltage V0-XV0 -0.3 － 19 V
LCD Power supply voltage VG -0.3 － 5.5 V

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Logic VDD-VSS － 3.0 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=+70℃		 －
14.8
－		 －
15.0
－		 －
15.2
－		 V
V
V
Input High Volt. VIH － 0.7VDD － VDD V
Input Low Volt. VIL － Vss － 0.3 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － Vss － 0.2VDD V
Supply Current IDD VDD=3.3V － － 2.0 mA


Specifiche di prodotto
Brand Winstar
Size 4.8"
Risoluzione 240x128
Area Attiva (mm) 107.98x57.58
Dot Size 0.43x0.43
Colore B/L, Tipo LCD B/L white, FSTN white pos
Alimentazione 3.3V
Interfaccia Display 6800/8080/SPI
IC Controller Display ST7586S-G4
Struttura Costruttiva COG
Angolo Visione 6H
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 26
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 4.8"
Risoluzione 240x128
Area Attiva (mm) 107.98x57.58
Dot Size 0.43x0.43
Colore B/L, Tipo LCD B/L white, FSTN white pos
Alimentazione 3.3V
Interfaccia Display 6800/8080/SPI
IC Controller Display ST7586S-G4
Struttura Costruttiva COG
Angolo Visione 6H
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display FPC per ZIF Connector
Nr. Pin 26
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di WO240128-85HB2#FC

WO240128-85HB2#FC

Graphic LCD 4,8'' 240x128, B/L white, FSTN white pos, COG + PCB with screw holes, 3V, Interface 6800, 6 O'clock
Da €24,40 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via Cavour, 69 21020 Buguggiate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Nuovi prodotti
Copyright © 2021 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via Cavour, 69 21020 Buguggiate (VA) Italy
;