Cerca
Filters
Close

WL0F00043000WGAABSA00-FC

TFT 4.3" 480x272, CAN Bus interface with CUSTOMIZABLE CAN ID, 400cd/m², Wide View Angle (IPS), Super Extended Temperature, Capacitive Touch Panel (GG)

DESCRIPTION

NEW 2nd generation 4.3” CAN BUS Smart Display which supports CUSTOMIZABLE CAN ID messages.

 

4.3 Inch Smart Display Feature:

  • DC 5V working voltage.
  • Self-testing after booting function.
  • CAN bus communication interface.
  • Supports Custom CAN ID protocol, default baud rate at 250KB.
  • Built in flash memory, store the fonts and pictures.
  • Support capacitive touch panel (CTP).
  • Smart Display scenario is slave device display and action from Master Device instruction.
  • Embedded buzzer controlled by Master Device.
  • Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
  • Design the UI without writing a line of code by winstar GUI builder! (►Link to GUI Builder Introduction)

 

DRAWING

 

 

SPECIFICATIONS

General Specifications

Mechanical Data

ItemStandard ValueUnit
LCD panel 105.5(W) × 67.2(H) × 4.6(D) mm
PCB 119.3(W) × 67.2(H) × 1.6 mm
Housing outline NA mm
 

General information

ItemStandard ValueUnit
Operating voltage 5 Vdc
Communication Interface CAN bus differential ± 3.3 Vpp
MCU STM32F750 N/A
Flash Memory 16 MB
SDRAM Frequency 108 MHz
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.6(D) mm
Active area 95.04(W) × 53.856 (H) mm
Dot pitch 0.066 (W) × 0.198(H) mm
Backlight Type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
With /Without TP With Projected Capacitive Touch Panel (PCAP)
Surface Glare
 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80
 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage VCC 4.5 5 5.5 V
Supply Current ICC - 330   mA
 

BOM

ItemDescription
LCM WF43-480272WD#APW3-FC
PCBA SV10004R300WA00N0100

 

Interface Pin Function

CN1 definition

PinSymbolFunctionRemark
1 GND GND Output
2-3 NC    
4 +5V +5V Output
5 GND GND Output
6-7 NC    
8 +5V +5V Output
9-10 NC Connection  
11 GND GND Output
12   GND GND Output
13 CAN_L Differential signal D- I/O
14 CAN_H Differential signal D+ I/O
15 GND Power supply GND input Input
16 +5V Power supply 5V input Input
 

CN2 definition

PinSymbolFunctionRemark
1-9 NC   -
10 GND GND Output
11 SYS_JTAG_SWO Data pin for JTAG interface I/O
12 NRST Reset pin for JTAG interface Input
13 SYS_JTAG_SWDIO Data pin for JTAG interface I/O
14 GND GND for JTAG interface Output
15 SYS_JTAG_SWCLK CLK pin for JTAG interface Input
16 VMCU 3.3V power for JTAG interface Output
SKU: WL0F00043000WGAABSA00-FC
Brand: Winstar
Disponibile: Si
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€89,90
€80,90
€77,20

Per quantita’ maggiori di 25pz prego invii la richiesta a sales@first-components.com o chiami il +39 0332 1888005

€89,90 IVA esclusa

DESCRIPTION

NEW 2nd generation 4.3” CAN BUS Smart Display which supports CUSTOMIZABLE CAN ID messages.

 

4.3 Inch Smart Display Feature:

  • DC 5V working voltage.
  • Self-testing after booting function.
  • CAN bus communication interface.
  • Supports Custom CAN ID protocol, default baud rate at 250KB.
  • Built in flash memory, store the fonts and pictures.
  • Support capacitive touch panel (CTP).
  • Smart Display scenario is slave device display and action from Master Device instruction.
  • Embedded buzzer controlled by Master Device.
  • Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
  • Design the UI without writing a line of code by winstar GUI builder! (►Link to GUI Builder Introduction)

 

DRAWING

 

 

SPECIFICATIONS

General Specifications

Mechanical Data

ItemStandard ValueUnit
LCD panel 105.5(W) × 67.2(H) × 4.6(D) mm
PCB 119.3(W) × 67.2(H) × 1.6 mm
Housing outline NA mm
 

General information

ItemStandard ValueUnit
Operating voltage 5 Vdc
Communication Interface CAN bus differential ± 3.3 Vpp
MCU STM32F750 N/A
Flash Memory 16 MB
SDRAM Frequency 108 MHz
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.6(D) mm
Active area 95.04(W) × 53.856 (H) mm
Dot pitch 0.066 (W) × 0.198(H) mm
Backlight Type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
With /Without TP With Projected Capacitive Touch Panel (PCAP)
Surface Glare
 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80
 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Supply Voltage VCC 4.5 5 5.5 V
Supply Current ICC - 330   mA
 

BOM

ItemDescription
LCM WF43-480272WD#APW3-FC
PCBA SV10004R300WA00N0100

 

Interface Pin Function

CN1 definition

PinSymbolFunctionRemark
1 GND GND Output
2-3 NC    
4 +5V +5V Output
5 GND GND Output
6-7 NC    
8 +5V +5V Output
9-10 NC Connection  
11 GND GND Output
12   GND GND Output
13 CAN_L Differential signal D- I/O
14 CAN_H Differential signal D+ I/O
15 GND Power supply GND input Input
16 +5V Power supply 5V input Input
 

CN2 definition

PinSymbolFunctionRemark
1-9 NC   -
10 GND GND Output
11 SYS_JTAG_SWO Data pin for JTAG interface I/O
12 NRST Reset pin for JTAG interface Input
13 SYS_JTAG_SWDIO Data pin for JTAG interface I/O
14 GND GND for JTAG interface Output
15 SYS_JTAG_SWCLK CLK pin for JTAG interface Input
16 VMCU 3.3V power for JTAG interface Output
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Alimentazione 5V
Interfaccia Display CAN Bus
Angolo Visione IPS
Frame Yes
Touch Panel Capacitive
Temperatura O. (°C) -30~80
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Alimentazione 5V
Interfaccia Display CAN Bus
Angolo Visione IPS
Frame Yes
Touch Panel Capacitive
Temperatura O. (°C) -30~80
Preferred - Not Preferred Preferred
Ultimi prodotti visti
;