LCD display size
1024 x RGBx600(TFT)
169.9(W) x 103.4(H) x 5.6(D)
154.2144 x 85.92
0.1506 x 0.1432
Min: 400; Typ: 450
TFT, Normally Black, Transmissive
With /Without TP
Power supply12V input
Power supply GND input
CAN bus D+
CAN bus D-
USART RX interface(Reserve)
USART TX interface(Reserve)
3.3V power for JTAG interface
CLK pin for JTAG interface
GND for JTAG interface
Data pin for JTAG interface
Reset pin for JTAG interface
Smart Display can be used to display the coordinate, status and data information provided by the connected HOST device. Customers can configure the position coordinates they want to display in normal operation mode.
The Display is designed to be easily connected to a controller network, and to operate with minimum setup or knowledge of the SDO configuration on the controllers.
The default splash image is shown below.
This product is produced as a generic product. If you require a custom splash image for your application, contact us to discuss.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a industry application situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a vehicle automotive situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a Medical application situation.
Per quantita’ maggiori di 25pz prego invii la richiesta a firstname.lastname@example.org o chiami il +39 0332 1888005